United Kingdom

UK Elcometer 101 QCA101A-01A Mechanical Coating Thickness Gauge with calibrating certificate

The Elcometer 101 mechanical Coating Thickness Gauge is suitable for hot metal spray coatings with a thickness measurement range of 0 to 600 µm. The Elcometer 101 mechanical Coating Thickness Gauge has a reading hold function and a calibrating certificate.
Model：
Contact
Details SPEC CAT

Elcometer QCA101A-01A Coating Thickness Gauge (calibrated certificate)SPEC

Elcometer QCA101A-01A Coating Thickness Gauge (calibrated certificate)Details

Elcometer QCA101A-01A Coating Thickness Gauge (calibrated certificate)Packing list

SKU
NB012498
Measurement principle
mechanical
Measurement range
0~600µm
margin of error
+/- 10% of the reading/2.5μm (0.1mil), whichever is greater
Minimum measurement surface
Φ25mm
Calibrated Certificate
With calibrated Certificate
Display screen
Ruler scale
operation surface
90 ° to the substrate
Minimum measurement surface
38*15mm
QCA101A-01A
Coating Thickness Gauge (calibrated certificate)
UK Elcometer 101 QCA101A-01A Mechanical Coating Thickness Gauge with calibrating certificate Picture

Introduction

The original non-destructive dry Film Thickness Gauge, the Elcometer 101, was the world's first portable coating Thickness Gauge and was produced in 1947.

Features

1. It has the function of reading holding

2. Accuracy ±10%

3. Suitable for dangerous places

4. Insensitive to cold and hot surfaces – suitable for hot metal jet coatings

Display diagram

Illustration of Elcometer 101 Mechanical Coating Thickness Gauge in the UK

FAQ
QWhat is the minimum measurement area for this Elcometer mechanical Coating thickness gauge?
A Hello, the area is 38x15mm.
QCan this mechanical Coating thickness gauge be applied to ISO2808?
A OK
Standard