United Kingdom

Elcometer 500 Thickness Gauge Probe T500-C2 Thickness Range 750~9000μm

SE
The ELCOMETER probe T500-C2 is an optional probe for the Elcometer 500 Thickness Gauge with a thickness measurement range of 750 to 9000 μm. The accuracy of the T500-C2 probe is +/- 2% or +/- 10 μm ( +/- 2% or +/- 0.4mil).
Model：
Contact
Details SPEC CAT

Elcometer T500-C2 probeSPEC

Elcometer T500-C2 probeDetails

Elcometer T500-C2 probePacking list

SKU
NB012584
Measurement range
750~9000μm
margin of error
±2%
Resolution
1μm|10μm
T500-C2
probe
Elcometer 500 Thickness Gauge Probe T500-C2 Thickness Range 750~9000μm Picture

Introduction

Elcometer probe T500-C2 is an optional probe for the Elcometer500 Thickness Gauge. The thickness measurement range is 750~9000μm. The accuracy of the T500-C2 probe is ±2% or ±10μm (±2% or ±0.4mil).

plan

Elcometer Probe T500-C2

FAQ
QA layer of steel wire is wrapped around the outside of the concrete, the thickness of the steel wire layer is about 7mm, and the outside of the steel wire is sprayed with a layer of mortar. The thickness of the mortar pump is about 30mm. Is it okay to measure the thickness of this anti-corrosion layer by lame plating on the outside of the mortar?
A Yes, it can be measured with the host of A500C-T and the probe of T500-C2, and there is software to read the data.
Standard