KairDa NDT530（N1） Coating Thickness Gauge brochure

• 
  KAIRDA NDT360 Ultrasonic Thickness Gauge 0.15~ 300mm

  0.15~ 300 mm (45 #steel)0.03mm ∈ 0.3% * H0.001mm

  ¥11050.0

  SE
• 
  Hardness test of roll Shore Hardness Gauge KAIRDA NDT290S cast steel roll, forged steel roll, cast iron roll

  30 ~ 110HS170 ~ 960HLD19 ~ 651HB13 ~ 100HRB17 ~ 68.5HRC59 ~ 85HRA80 ~ 976HVAny (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel, cast steel rolls, forged steel rolls, cast iron rolls

  SE
• 
  KAIRDA NDT230 + Leeb Hardness Tester

  HLD (170-960) loyal HRC (30.6-102.6) loyal HRC (17.9-69.5) loyal HB (19-683) loyal HV (80-1042) loyal HRA (59.1-88) loyal HRB (13.5-101.7)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile cast iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel2.4 inch full Viewing Angle TFT liquid crystal

  ¥1400.0

  SE
• 
  Metal Leeb Hardness Tester KAIRDA NDT290 + Hardness measurement of various metal materials

  170 ~ 960HLD19 ~ 651HB13.5 ~ 101.7HRB17.9 ~ 69.5HRC59.1 ~ 88HRA80 ~ 1042HV30.6 ~ 102.6HSAny (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel

  SE
• 
  Leeb Hardness Tester Impact device (probe) KAIRDA type C measurement small thin parts and surface hardening layer

  2.7mJ3.0g1600HV

  SE
• 
  KAIRDA F190 ° 90 ° Right Angle Probe Optional probe for NDT530 Coating Thickness Gauge

  magnetic induction0 ~ 1250µm±3%

  ¥2550.0

  SE
• 
  Roughness Gauge Probes (Sensors) KAIRDA KS120 Small Hole Probe

  Small hole probeRoughness of the inner surface of the hole with an aperture greater than 2mm can be measured, the maximum depth is 9mm, and the plane and cylinder can also be measured

  SE
• 
  KAIRDA HT5 (0~350 ℃) Ultrasonic Thickness Gauge Probe, High Temperature Resistant

  probe

  SE
• 
  High-precision Roughness Gauge KAIRDA NDT150 surface roughness testing instrument

  digital displayRa、Rz=Ry(JIS)、Rq、Rt=Rmax、Rp、Rv、R3z、R3y、RzJIS、Rs、Rsk、Rku、Rsm、RmrZ axis (vertical): 160μm; X axis (horizontal): 17.5mm

  SE
• 
  Surface roughness Tester KAIRDA NDT110 Metal and Non-metallic parts surface roughness testing instrument

  digital displayRa、Rz、Rq、RtRa、 Rq: 0.05μm ~ 15μm RzRt: 0.1μm ~ 50μm

  SE

• 1HTechMT CO600FCS+F1S Coating Thickness Gauge brochure
• 2NDTone K5-C NF1 Coated platings Thickness Gauge brochure
• 3Elcometer T456CFNF1ARM probe brochure
• 4Defelsko PosiTector 6000 N90S3 Coating Thickness Gauge brochure
• 5DongRu DR260 Coating Thickness Gauge brochure
• 6PoRuiKe BCT-210C（F1） Coating Thickness Gauge brochure
• 7Elcometer T456CF2SW probe brochure
• 8Elcometer Elcometer 211 A211F--8M Coating Thickness Gauge brochure
• 9YOWEXA EC-666S Thickness Gauge brochure
• 10LinShang LS220H Coating Thickness Gauge brochure