KairDa NDT320 Ultrasonic Thickness Gauge brochure

Related products

KAIRDA NDT681 digital Ultrasonic Flaw Detector PDF report 640 * 480 resolution
0~15 meters (steel medium shear wave) transmission 30 meters (standard model); 0~20 meters (steel medium shear wave) transmission 40 meters (high performance model)100~15000m/s (standard model); 100~20000m/s (high-performance model)20~2000Hz

¥6450.0
SE
Leeb Hardness Tester Impact device (probe) KAIRDA type C measurement small thin parts and surface hardening layer
2.7mJ3.0g1600HV

SE
KAIRDA F190 ° 90 ° Right Angle Probe Optional probe for NDT530 Coating Thickness Gauge
magnetic induction0 ~ 1250µm±3%

¥2450.0
SE
KAIRDA NDT530 (F1) Galvanized Thickness Gauge with magnetic Induction Probe
Magnetic Induction0~1250μm±2%

¥1380.0
SE
KAIRDA NDT150A Surface Roughness Tester
Z-axis (vertical): 160μm; X-axis (horizontal): 17.5mm (0.69inch)0.002μm/±20μm；0.004μm/±40μm；0.008μm/±80μmRa、Rz==Ry(JIS)、Rq、Rt==Rmax、Rp、Rv、R3z、R3y、Rz(JIS)、Rs、Rsk、Rku、Rsm、Rmr、RPc、Rk、Rpk、Rvk、Mr1、Mr2

¥3780.0
SE
Roughness Gauge Probes (Sensors) KAIRDA KS131 Deep Groove Probe
Deep groove probeIt can measure grooves with a groove width of more than 3mm and a groove depth of less than 10mm; or the surface Roughness of steps with a height of less than 10mm, and can also measure planes and cylinders.

SE
KAIRDA HT5 (0~450 ℃) Ultrasonic Thickness Gauge High Temperature Probe
3.0~200mm30mmprobe

SE
Leeb Hardness Tester Impact device (probe) KAIRDA DL type measurement slender narrow groove or hole
11mJ5.5g/7.2g1600HV

SE
KAIRDA NDT680 digital Ultrasonic Flaw Detector nondestructive detection 500 sets of configuration channels
(0~15000)mm(0.2~20)MHz(100~20000)m/s

¥7780.0
SE
KAIRDA NDT110B pocket surface roughness Tester
digital displayRa、Rz、Rq、RtRaRq: 0.05μm ~ 15μmRzRt: 0.1μm ~ 50μm

¥2320.0
SE

Recommended for more brochure