Handheld Leeb Hardness Tester KAIRDA NDT280 Metal shell Durable Hardness Gauge

NDT280

Leeb Hardness Tester

Introduction

The shell of Aedas NDT280 Handheld Leeb Hardness Tester is a fully sealed red metal shell. It is a sturdy and durable portable Leeb Hardness Tester. It uses a D-type impact device and can be equipped with other six impact devices to measure hardness values in different ranges. . The display screen of the NDT280 handheld Leeb Hardness Tester is a bright LCD liquid crystal display screen with LCD backlight function, which can easily measure the hardness value of the material in a dim environment with insufficient light. Computer to realize data management and operation.

Features and advantages

1. The menu operation in the full text is simple and convenient.

2. Bright LCD liquid crystal display, with LED backlight function, very convenient to use in low light conditions.

3. The fully sealed metal shell is durable and has very good anti-vibration, impact and electromagnetic interference capabilities.

4. NDT280 hand-held Leeb Hardness Tester has a USB interface and data processing software, which can be connected to a computer for data exchange, printing and parameter setting .

5. 7 different impact devices can be selected, no calibration is required for replacement, and different impact devices can be automatically identified.

6. NDT280 hand-held Leeb Hardness Tester can pre-set the upper and lower values, and the over-limit alarm function.

7. Seven hardness values including Shore (HS), Leeb (HL), Brinell (HB), Rockwell (HRC/HRB/HRA), and Vickers (HV) can be measured once and converted automatically.

8. With data storage function, it can store 600 sets of measurement data.

Application

● machining industry

● Mold cavity

● Heavy workpieces

● Workpieces with very narrow experimental space

● Bearings and other parts

● Material classification of metal material warehouse

● Failure analysis of pressure vessels, turbogenerators and their equipment

● Rapid detection of multiple measuring parts in a large area of a large workpiece

● Especially suitable for on-site hardness testing of large parts and non-detachable parts 

Pictures

Packing list：Host x1, D-type Impact device x1, standard Hardness block x1, nylon brush x1, screw driver x1, small support ring x1, communication cable x1, No. 5 battery x2, data processing software CD x1, manual x1, certificate (warranty card) x1, instrument special case x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.