Gloss Measurement Instrument JFL-BZ20 (high light smart) JFL 20 degree surface high gloss measurement

JFL-BZ20 (highlight smart)

Glossmeter

Introduction

JFL JFL-BZ2 gloss measuring instrument is a high-gloss gloss measuring instrument with a measuring angle of 20 degrees in the JFL-B series general-purpose, and the measuring range is 0.0~300.0 gloss units. It uses four small Ni-MH rechargeable batteries, and the single-chip computer integrated into the circuit. During the use of JFL-BZ20 gloss meter, there is no need to frequently calibrate the nominal value. It is convenient to use, has the advantages of long light source life, good repeatability, small size, and good stability. JFL JFL-BZ2 gloss meter is suitable for high gloss Surface gloss measurement in paint, plastic, printing and other fields.

Application

The applicable industries of JFL-BZ20 gloss meter are: high-gloss paint, paint, ink, plastic, stone, floor, wooden furniture.

Standards

JFL-BZ20 Gloss Meter complies with ISO-2813, ASTM-D2457, GB9754, GB8807 and other domestic (CN) and foreign standards.

Operation method

1. Press the switch of the JFL-BZ20 gloss meter , place the gloss meter on the black glass calibration plate, and turn the adjustment knob to make the displayed value the same as the nominal value of the standard plate.

2. Put the gloss measuring instrument JFL-BZ20 on the white ceramic standard plate, the error between the displayed value and the nominal value of the white ceramic standard plate should not be greater than ±1.2 gloss units, otherwise, the standard plate is dirty and other problems should be considered.

3. When the error is out of tolerance, calibrate again according to the previous two steps.

4. Measure the sample after calibration, when the measured value exceeds 199.9 gloss units, the display overflows "1".

Pictures

Packing list：host (including rechargeable battery) x1, standard board (including blackboard, whiteboard) x1, zero board (black velvet on standard board box) x1, charger x1, manual x1, product certificate x1, instrument case x1.

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.