China

YONGLIDA QNB-ISO-4 ISO Flow Cup (including bracket) viscosity range: 34~ 135cst

SE
Viscosity range 34~ 135cSt, flow hole diameter 4mm, cup body material aluminum alloy, filter material stainless steel, applicable standards ISO 2431, GB/T 6753.4.
$164.00/piece
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con CAT
Similar products

YongLiDa QNB-ISO-4 ISO Flow Cup (including bracket)SPEC

YongLiDa QNB-ISO-4 ISO Flow Cup (including bracket)Details

YongLiDa QNB-ISO-4 ISO Flow Cup (including bracket)Packing list

SKU
NB012981
Viscosity range
34~135cSt
Flow hole diameter
4mm
Cup body material
aluminum alloy
Filter material
stainless steel
Applicable standard
ISO 2431、GB/T 6753.4
Certificate
without
QNB-ISO-4
ISO Flow Cup (including bracket)
Viscosity range 34~ 135cSt, flow hole diameter 4mm, cup body material aluminum alloy, filter material stainless steel, applicable standards ISO 2431, GB/T 6753.4.
YONGLIDA QNB-ISO-4 ISO Flow Cup (including bracket) viscosity range: 34~ 135cst Picture

Introduction

Note: The ISO outFlow Cup is designed according to ISO 2431 "Paints and varnishes --- Determination of outflow time by outFlow Cup" (fourth edition) and GB/T6753.4 "Determination of paint outflow time --- ISO Flow Cup method". It is an internationally used tool for testing product viscosity. It is used to measure the outflow time of Newtonian or approximate Newtonian liquids (within 100 seconds outflow time)

plan

Yonglida QNB-ISO-4 ISO outFlow Cup (including bracket) display

FAQ
QI want to measure the viscosity of the Coating, about 50cSt, which flow cup is suitable?
A Measurement range of this ISO flow cup is 34~ 135cSt, just cover the 50cSt you need, and in line with ISO and national standards, Coating viscosity measurement is very accurate.
QIs this ISO flow cup compliant with ISO 2431? Test tri-proof paint
A Hello, it matches.
QCan YONGLIDA QNB-ISO-4ISO flow cup meet the JJG743 standard?
A Applicable, you can consult the customer service of the mall for details about the JJG743 standard.
QEpoxy resin Coating viscosity measurement with what material Viscometer is better?
A Measurement Coating viscosity generally can choose viscosity cup or Viscometer, viscosity cup mainly measures relative viscosity, Viscometer measures dynamic viscosity. In general, in addition to thixotropic Coating, Coatings under 150s can be coated with 4 cups, and Coatings under 20 can be coated with 1 cup. In addition, Yehui uses ISO flow cup to measure Newton-type liquid Coating viscosity, Stormer Viscometer to measure architectural coatings viscosity, and for all brush coatings, rotational viscometer or Cone and Plate Viscometer measurement can be used.
QCoating viscosity measured by flow cup method, must be at the specified temperature? If not according to the specified viscosity will have any impact?
A Viscosity cup measurement generally has 3 variables, viscosity, outflow time and temperature. Temperature is specified in many viscosity measurement standards because temperature has a large impact on viscosity, and the change of viscosity with temperature may not be dominant, and any diluted material used to adjust viscosity may also change the rate of this change.
QDoes the ISO flow cup of Yonglida match the cup?
A Hello, it's standard.
Knowledge
Standard
Filter Brand Store Contact