TQC VF2095 Pressure Density Cup Capacity 100ml

VF2095

Pressure Density Cup

Pressure Density Cup, cup volume 100ml, material stainless steel, can be easily disassembled, easy to clean.

The density or specific gravity (SG) is affected by the air bubbles entrained in the liquid being measured. The TQC VF2095 SG-cup has an internal fixed capacity of 100 ml. This will be compressed by the mechanism of the density cup.

After rotation, agitated or dispersed gases and air can be trapped within the material. Under pressure, the air will dissolve better into the liquid, and any undissolved bubbles will be compressed to a fraction of their original size. The density of the liquid is defined by weighing at a very high level of repeatability.

The TQC pressure density cup can be easily removed for easy cleaning.

standard

EN ISO 2811-4. Find the appropriate standards to perform the test correctly. Testing can only be performed if all parts of the pressure density cup have the same serial number.

peculiarity

• Minimize the effects of entrained air bubbles

• High level of repeatability

• Easy to clean supply range

• Pressure density cup 100 ml

• Desk stand

• Brush 25 mm and 40 mm

• Calibration certificate

Packing list：Pressure Density Cup × 1, Product Manual × 1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.