Netherlands

TQC VF2104 single-channe grinding Fineness of Grinding Gauge 0~15μm with calibrated certificate

SE
Grindometer 0-15 µm, single-channe DIN/ISO
$1044.00/set
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO OI
Similar products

TQC sheen VF2104 Single-channe Fineness gaugeSPEC

TQC sheen VF2104 Single-channe Fineness gaugeDetails

TQC sheen VF2104 Single-channe Fineness gaugePacking list

SKU
NB013353
Scraper type
Single-channe
Number of grooves
1
range
0~15μm
Scale unit
μm
Accuracy
±2μm
scraper material
ASAB Stavax tool steel, Sub Zero vacuum hardening (+ 1756 ℃~ -70 ℃)
Scraper size
175*60*12mm
Groove width
12mm
Drawdown blade size
75*38*8mm
Applicable standards
ASTM D 1210、ASTM D 1316、JIS K 5600-2-5、ISO 1524、DIN EN 21524、BS 3900-C6
Graduation
1.5μm
Calibrated Certificate
With Certificate
VF2104
Single-channe Fineness gauge
Grindometer 0-15 µm, single-channe DIN/ISO
TQC VF2104 single-channe grinding Fineness of Grinding Gauge 0~15μm with calibrated certificate Picture

TQC VF2104 single-groove scraper grinding fineness measurement range of 0-15μm, using tool steel hardening and polishing treatment, accuracy ± 2μm, widely used in paint color paste, paint varnish, pigment filler and other particle size and grinding fineness detection.

TQC VF2104 Single-channe Fineness Gauge Detail Figure 1

TQC VF2104 Single channel Fineness gauge Detail Figure 2

TQC VF2104 Single-channe Fineness Gauge Detail Figure 3

TQC VF2104 Single Groove Fineness Gauge Detail Figure 4

TQC VF2104 Single Groove Fineness Gauge Detail Figure 5

TQC Grindometer full range

Groove typeRangeModelmicronHPCU
pair0 - 15VF2110XXX
pair0 - 25VF2111XXX
pair0 - 50VF2112XXX
pair0 - 100VF2113XXX
pair0 - 250VF2118XXX
pair0 - 500VF2124X

single0 - 15VF2104X

single0 - 25VF2105X

single0 - 50VF2106X

single0 - 100VF2107X

single0 - 250VF2108X

single0 - 500VF2109X

wide0 - 15VF2120XX
wide0 - 25VF2121XX
wide0 - 50VF2122XX
wide0 - 100VF2123XX
wide0 - 250VF2125XX


Meets standards

ASTM D 1210，ASTM D 1316，JIS K 5600-2-5，ISO 1524，DIN EN 21524，BS 3900-C6

features

Precision instrument, accuracy ± 2μm

Ergonomic scraper for easy holding.

Multiple models are available

adoptASAB Stavax ESR Stainless Steel Tool Steel, Sub Zero Vacuum-Hardened (+1756°C to -70°C), Hardness HRC 55 (by hardening)

Surface polishing

FAQ
QIs this single-channe Fineness gauge ASTMD1210-05 compliant?
A The single-channe Fineness gauge applies to ASTMD1210-05. Please consult customer service for detailed application definition.
QWhat instrument is used for the measurement of the size of solid aggregates in the slurry?
A This type of scraper Fineness meter can determine the Fineness in the slurry. The scraper Fineness meter method is an accurate, fast and easy-to-operate method. The specific model selection can be based on your estimated slurry Fineness. For details, please consult the technical engineer of NBchao. Com Mall.
QFineness of electric conductive ink particles, is it measured with this scraper Fineness meter? How to measure?
A Fineness of electric conductive ink can be measured with scraper Fineness meter. For specific measurement methods, please refer to the operation manual or video of NBchao. Com Mall Knowledge Base or any Fineness meter details page.
QCarbon nanotube slurry with which type of Fineness gauge? Fineness about 5 to 10 error.
A It is recommended to use a Fineness gauge with a range of 0 to 15 μm, one path 2 paths is OK. If this range is expected to expand, choose a Fineness gauge with a range of 0 to 25 μm appropriately.
QCan the TQCVF2104 Fineness gauge be used to scrape around 10μm of pigment?
A Yes, the single-channe Fineness gauge can scrape material fineness below 0~ 15μm.
Knowledge
Standard
Filter Brand Store Contact