Netherlands

TQC VF2106 single-channe grinding Grindometer 0~50μm with calibrated certificate

SE
Grindometer 0-50µm, single-channe DIN/ISO
$1044.00/set
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO OI
Similar products

TQC sheen VF2106 Single-channe Fineness gaugeSPEC

TQC sheen VF2106 Single-channe Fineness gaugeDetails

TQC sheen VF2106 Single-channe Fineness gaugePacking list

SKU
NB013355
Scraper type
Single-channe
Number of grooves
1
range
0~50μm
Scale unit
μm
Accuracy
±2μm
scraper material
ASAB Stavax tool steel, Sub Zero vacuum hardening (+ 1756 ℃~ -70 ℃)
Scraper size
175*60*12mm
Groove width
12mm
Drawdown blade size
75*38*8mm
Applicable standards
ASTM D 1210、ASTM D 1316、JIS K 5600-2-5、ISO 1524、DIN EN 21524、BS 3900-C6
Graduation
5μm
Calibrated Certificate
With Certificate
VF2106
Single-channe Fineness gauge
Grindometer 0-50µm, single-channe DIN/ISO
TQC VF2106 single-channe grinding Grindometer 0~50μm with calibrated certificate Picture

TQC VF2106 single-groove scraper grinding fineness measurement range of 0-50μm, using tool steel hardening and polishing treatment, accuracy ± 2μm, widely used in paint paste, paint varnish, pigment filler and other particle size and grinding fineness detection.

TQC VF2106 Single-channe Fineness Gauge Detail Figure 1

TQC VF2106 Single channel Fineness gauge Detail Figure 2

TQC VF2106 Single Groove Fineness Gauge Detail Figure 3

TQC VF2106 Single channel Fineness gauge Detail Figure 4

TQC VF2106 Single Groove Fineness Gauge Detail Figure 5

TQC Grindometer full range


Groove typeRangeModelmicronHPCU
pair0 - 15VF2110XXX
pair0 - 25VF2111XXX
pair0 - 50VF2112XXX
pair0 - 100VF2113XXX
pair0 - 250VF2118XXX
pair0 - 500VF2124X

single0 - 15VF2104X

single0 - 25VF2105X

single0 - 50VF2106X

single0 - 100VF2107X

single0 - 250VF2108X

single0 - 500VF2109X

wide0 - 15VF2120XX
wide0 - 25VF2121XX
wide0 - 50VF2122XX
wide0 - 100VF2123XX
wide0 - 250VF2125XX


Standards:

ASTM D 1210，ASTM D 1316，JIS K 5600-2-5，ISO 1524，DIN EN 21524，BS 3900-C6

features

Precision instrument, accuracy ± 2μm

Ergonomic scraper for easy holding.

Multiple models are available

adoptASAB Stavax ESR Stainless Steel Tool Steel, Sub Zero Vacuum-Hardened (+1756°C to -70°C), Hardness HRC 55 (by hardening)

Surface polishing

FAQ
QThis one can measure the agglomeration of precious metal pastes?
A The agglomeration degree of precious metal slurry, commonly known as fineness, refers to the size of the solid agglomerates in the slurry and is therefore appropriate.
QDoes the TQC single-channe Fineness gauge meet the JB/T9385 standard?
A The VF2106 single-channe Fineness gauge can be referred to
QWhat instrument is used for the measurement of the size of solid aggregates in the slurry?
A This type of scraper Fineness meter can determine the Fineness in the slurry. The scraper Fineness meter method is an accurate, fast and easy-to-operate method. The specific model selection can be based on your estimated slurry Fineness. For details, please consult the technical engineer of NBchao. Com Mall.
QGravure plate Printing ink Fineness inspection which?
A Gravure plate Printing ink can be selected from 0~ 50μm scraper Fineness meter (domestic Qxp-50), one path or 2 paths can be selected according to their own requirements. reference standard GB/T 13217.3
QCan this instrument be used to determine the Fineness of silver and platinum slurry?
A Yes, not only silver and platinum slurries, but also most precious metal slurries can be determined by a scraper Fineness meter.
QCan the VF2106 Fineness gauge be used to scrape around 38 microns?
A Suitable, the single-channe Fineness gauge can scrape material fineness below 0~ 50μm.
Knowledge
Standard
Filter Brand Store Contact