Back

DGC DHT-100 Hardness Tester Specifications

Search
Leeb Hardness Tester DHT-100 DGC metal alloy Leeb Hardness Tester

Brand:DGC

Model:DHT-100

Name:Hardness Tester

DetailsContact
Specifications
Display 128 × 64 LCD dot matrix liquid crystal display
Measurement range 180~960HL、17.0~68.0HRC、13.3~100.0HRB、5.0~99.9HS、30~680HB、80~999HV
Error of indication ±0.5%(HL=800)
Data storage Automatically store 1250 sets of measurement data. Expandable storage 2500 sets. Batch storage 12 batches, each batch stores 100 sets of data.
Power Supply Two AAA batteries (No. 7), can work continuously for not less than 48 hours (without backlight)
Automatic shutdown Automatic shutdown for 2 minutes without operation
Operating temperature Operating temperature: -20~ + 40 ℃
Storage temperature ~30~+60℃
Dimensions 108*62*25mm
Weight 180G (without battery)
Indication Repeatability ±0.8%
Indication Repeatability ±0.8%
Packing list
host x1, probe x1, Richter Hardness block x1, brush x1, small support ring x1, No. 7 battery x2, random data x1, instrument case x1.
After-sales instructions

Warranty days: 760 days

1. After-sales service is provided by the original factory;

2. The whole machine is guaranteed for two years, and wearing parts and consumables are not covered by the warranty (such as probes, LCD screens, casings, small support rings, etc.);

3. The following two situations need to be repaired for a fee: 

A. It is used under normal conditions, and there is a failure, but it has been exceededtwoannual warranty;

B. Use under abnormal circumstances, including man-made physical damage, failure to operate in accordance with the instructions and precautions.

[Note] For after-sales services outside the Chinese mainland, if the instrument requires repair, the shipping and possible associated taxes shall be borne by the sender. Generation address of the manual: http://en.nbchao.com/p/1342/Specification.html , which is only used by users who purchase commodities from the NBCHAO.