WF30 Colorimeter 4mm small diameter Colorimeter automatic correction, visual positioning
SE
4Mm small diameter, suitable for testing small pieces, curved surface and other products, built-in whiteboard automatic correction, repeability accuracy < 0.05, with computer software.
100 master standard data, 200 sample data under each master standard
Power
Lithium battery can be measured 5000 times after being fully charged
display mode
BODY
Operating conditions
0 ℃ -40 ℃ (32 ° F -104 ° F); Relative Humidity below 85% No condensation
Storage environment
-20 ℃ -50 ℃; Relative Humidity is less than 85% without condensation
Dimensions
199*68*90mm
Weight
700g
Light-containing method
SCI SCE
Inter-station difference
ΔE * from < 0.2
Lighting source life
5 years more than 1.60 million measurements
Display
TFT True Color Display 2.8inch @(16:9) Resolution: 400x240
Packing size
400*240*340mm
Optional accessories
Liquid test kits, powder test boxes, micro printers
WF30-4mm
Colorimeter
4Mm small diameter, suitable for testing small pieces, curved surface and other products, built-in whiteboard automatic correction, repeability accuracy < 0.05, with computer software.
The domestic (CN) IWave WF30 series has three measurement calibers of 4mm, 8mm and 16mm. The WF30-4mm portable Colorimeter has a small caliber of 4mm and is often used to measure the color difference of some curved surfaces or small-area products. WF30-4mm portable Colorimeter is a horizontal structure design, ergonomic appearance structure, small size, comfortable grip and stable measurement. In addition, the WF30-4mm portable Colorimeter has the function of automatic power-on calibration, which reduces the operation process.
Packing list:Host X1, White Calibration plate X1, Data cable X1, Manual X1, Warranty card X1
[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
QWhat are the measurement light sources of this WF40 color reader?
A
Hello, the measurement light sources are D50, D62, F11 (TL84).
QDoes the WF30 color reader come standard with a printer?
A
Hello, this color reader can be connected to the printer, but the printer needs to be purchased separately, and there is no standard one.
QDoes your color reader have a 1MM aperture?
A
Hello, there is currently no such small aperture, the smallest is 3mm.
QDo you have the color readers required by the GB/T1766 standard?
A
This WF30-4mm color reader will do.
QHow is the WF30 color reader tested?
A
Hello, this WF30-4mm color reader requires two steps for color difference measurement, namely "master standard measurement" and "sample measurement". 1. Master standard measurement obtains the standard Color parameters of the standard sample; 2. Sample measurement obtains the parameters of the sample to be tested, and obtains the color difference data between the sample and the master standard at the same time.
QWill the data be automatically saved after WF30-4mm measurement, or do you need to manually press the button?
A
Hello, this color reader provides two ways to save automatically and manually. You can set any save method in the settings.
QCan color difference meters be used in the Glass industry?