- SKU
- NB013534
- material
- stainless steel
- Upper pressure needle length
- 30±1mm
- Lower support pin length
- 40±1mm
- Weight
- 0.8kg
- applicable standard
- GB/T6548-2011、QB/T1671、TAPPI T821
- Upper part pressure needle diameter
- < unk > (3.5 +/- 0.1) mm (A corrugated), < unk > (3.0 +/- 0.1) mm (C corrugated), < unk > (2.0 +/- 0.1) mm (B corrugated), < unk > (1.0 +/- 0.1) mm (E corrugated)
- Number of upper pressure needles
- 4 (A corrugated), 4 (C corrugated), 6 (B corrugated), 6 (D corrugated)
- Lower part support needle diameter
- < unk > (3.5 +/- 0.1) mm (A corrugated), < unk > (3.0 +/- 0.1) mm (C corrugated), < unk > (2.0 +/- 0.1) mm (B corrugated), < unk > (1.0 +/- 0.1) mm (E corrugated)
- Number of needles supported in the lower part
- 5 (A corrugated), 5 (C corrugated), 7 (B corrugated), 7 (E corrugated)
- Packaging Dimensions
- 275*226*84mm
- Weight
- 1.6kg
17074
Cardboard adhesive strength test stand
Measure the adhesive strength between corrugated Cardboard layers, made of stainless steel, in line with GB and QB standards.
Introduction
LABO Huike LABO 17074 Corrugated Board Bonding Strength Test Rack is used to measure the bonding strength between corrugated board layers, such as single-layer corrugated board, that is, the bonding strength between face paper and corrugated paper, corrugated paper and inner paper, which is a special , Standard test equipment.
Features
LABO Huike LABO 17074 corrugated cardboard adhesion strength test frame is made of stainless steel, suitable for various flute types, and can adjust various flute distances arbitrarily.
product display

Packing list:complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1
[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.