LABO LB-C48 Cardboard Puncture strength Tester
SE
LB-C48
-
CHINA NBC-8506 Microcomputer Intelligent Penetration Strength Testing Machine$ 1599.00SE -
CHINA ZY-CC Piercing Tester$ 1936.00SE -
PUYUN PY-H617 Microcomputer Piercing Strength Tester 1-48J$ 1750.00SE -
YINUO YN-CCY48 Microcomputer Penetration Strength Tester 1-48J$ 2418.00SE -
HP-CC48B Cardboard Puncture strength Tester$ 2200.00SE
Labo LB-C48 Cardboard Penetration strength TesterSPEC
Labo LB-C48 Cardboard Penetration strength TesterDetails
Labo LB-C48 Cardboard Penetration strength TesterPacking list
- SKU
- NB013561
- Measuring range
- 1~ 48J (fourth gear)
- Error of indication
- A file: 1~ 6 ± 0.05J; B file: 1~ 12 ± 0.10J; C file: 1~ 24 ± 0.20J; D file: 1~ 48 ± 0.50J
- Friction sleeve resistance
- <0.25J
- Number of swing arm swings
- > 120 times/min
- Pyramid characteristic size
- The length of the three bottom edges is 60 * 60 * 60mm, and the height is (25 ± 0.7) mm.
- Edge fillet radius
- R(1.5±0.1)mm
- Service life of Chinese measurement and control LCD
- About 50,000 hours
- Power
- AC220V ± 22V 50Hz 0.5A should be reliably grounded
- Dimensions
- 860*500*800mm
- Weight
- 165Kg (net Weight)
Introduction
LB-C48 is designed with high-strength steel structure to ensure stability and reliability during impact testing. Fast clamping of the sample, automatic reset of the operating handle, with safety protection device, LCD Chinese display measurement and control system, full computer control technology, open structure, high automation program, simple and convenient operation, safe and reliable.
Standards
GB/T2679.7, ISO3036, ASTM D781, TAPPI T803
Features
Fast clamping of the sample, automatic reset of the operating handle, with safety protection device, LCD Chinese display measurement and control system, full computer control technology, open structure, high automation program, simple and convenient operation, safe and reliable. Fully automatic measurement, intelligent judgment function, the operating system displays the measurement results in real time. Chinese menu display operation interface, statistics and storage of test results, thermal high-speed micro-printer printing, low noise, no ink and ribbon.
Test description
Install a suitable counterweight on the swing arm, and hang the swing arm at the starting position, then close the locking block, lock the locking screw, and put the friction collar on the rear of the piercing head, according to the configuration Select the test gear with a heavy weight, then clamp the sample to be tested between the upper and lower splints, open the locking screw, release the locking block, the pendulum swings, the piercing head passes through the sample, when the pendulum swings back , take advantage of the situation to catch the swing arm with your hand, lift the pendulum, put it back to the position of the locking block, lock the screw, read the measured value on the display screen, and prepare for the next test. Measure the longitudinal front and back of the sample, and the transverse front and back of the 4 measured values to carry out the arithmetic mean. If the result is less than 12J, then the accuracy is to 0.1J; if the result is greater than 12J, the accuracy is to 0.2J. Note: Select the appropriate counterweight weight so that the measurement result is between 20% and 80% of the maximum value. If it is higher or lower than that, you should change gears (select the corresponding weight according to different gears).