KEELREIN LHS-250CA Constant Temperature and Humidity Chamber -20~85 ℃/250L

LHS-250CA

Constant Temperature and Humidity Chamber (without observation window)

Introduction

Shanghai Qixin LHS-250CA Constant Temperature and Humidity Chamber (No Observation Window) This series of products has a precise temperature and humidity control system, which provides various environmental simulation conditions required for industrial research and biotechnology testing. Therefore, it can be widely used in sterility testing such as textile, food processing, etc. Stability check and testing of raw material performance, product packaging, product life and other tests of industrial products.

Features

1. LCD (program) temperature and humidity controller, PID control temperature and humidity, accurate and reliable data.

2. The stainless steel liner is made of good, the four corners of the semi-circular arc are easy to clean, and the spacing of the partition in the box is adjustable.

3. Fully imported compressor, environmentally friendly fluorine-free refrigerant (R404a), low energy consumption, promote energy saving.

4. Imported low-noise roller fan and unique air duct design ensure uniform temperature and humidity distribution in the studio.

5. Bypass refrigeration capacity control technology and dynamic precision constant temperature and humidity control system to ensure long-term uninterrupted and reliable operation.

6. Built-in rapid humidification device, automatic adjustment of water level height and alarm function to ensure stable humidification ability and long-term reliable operation.

7. LHS series has printing function and USB interface, which can print and record temperature and humidity changes in real time. (Matched)

8. The test hole with a diameter of 25mm on the left side of the box is convenient for experimental operation and temperature measurement. (Matched)

9. Set up an independent temperature limit alarm system, which will be automatically interrupted when the limit temperature is exceeded, so as to ensure the safe operation of the experiment. No accidents. (Matched)

10. The temperature and humidity controller of the LCD program can be set to 99 cycles and 30 segments, and each period of time is set to 1-9999 hours or minutes.

Packing list：Shelf X3, host X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.