China

TROPHY /OTZ 25x150x0.28mm Tackle iron plate, thickness 0.28mm right angle without punching

TROPHY /OTZ 25x150x0.28mm tinplate is a non-punched tinplate for powder coatings testing, with a thickness of 0.28mm. The tinplate is mainly used for powder coatings performance testing in laboratories.
Certificate
Contact
Details SPEC

OTZ 25X120x0.28 (right angle without punching) (500 pieces) tinplateSPEC

OTZ 25X120x0.28 (right angle without punching) (500 pieces) tinplateDetails

OTZ 25X120x0.28 (right angle without punching) (500 pieces) tinplatePacking list

SKU
NB014423
Length (mm)
120
Width (mm)
25
Thickness (mm)
0.28
corner shape
right angle
Whether to punch holes
No
raw material
Baosteel
Tin plating amount
E4
Hardness
T52/T54 (random with factory batch)
Encasement
500 pieces/pack
25X120x0.28 (right angle without punching) (500 pieces)
tinplate
TROPHY /OTZ 25x150x0.28mm Tackle iron plate, thickness 0.28mm right angle without punching Picture

Introduction

Twards25x150x0.28 tinplateIt is used for proofing coating, there are two kinds of punching and non-punching, and the coating film is required to be prepared on the tinplate during the performance testing (adhesion, hardness, impact, flexibility, bending, drying time) of industrial coatings. The amount of tinplate, hardness and surface treatment on the surface of tinplate are the most important factors affecting the test results.25x150x0.28 tinplateThe size is 25x150mm, the thickness is 0.28mm, in line with GB2520 standard.

Raw material: 0.28mmPacific tinplate(Made in Japan, better quality)

Applicable industries

25x150x0.28 tinplateIt is suitable for coatings, inks, automobiles and other industries.

Actual picture of the product

特沃兹25x150x0.28马口铁实拍图3

特沃兹25x150x0.28马口铁实拍图4

FAQ
QDo you have the tinplate required in the GB/T9779 standard?
A This 25x120x0.28 (right angle without punching) (500 pieces) tinplate will do.
Knowledge
Standard