AMITTARI AS-120P Pencil Hardness Tester brochure

Related products

AMITTARI AV-160T Rotation speed meter, vibratIon Meter, bearing condition measurement
Piezoelectric Vibration Sensors± (5% n + 2) words0.001~ 4.000 mm peak-peak

¥3030.0
SE
Induction Wood Moisture Meter AMITTARI AM-128S High Frequency Electromagnetic Wave Induction Wood Moisture Meter
LED display light; used to display values and moisture status, green light on, indicating safe moisture status; yellow light on, indicating critical moisture status, red light on, indicating wet moisture status0~70%0.1

¥1030.0
SE
AMITTARI WA-160A Water Activity Meter
6-Digit backlit LCD digital display, 3-digit Humidity aw, 3-digit temperature display0~1.0aw±0.01aw

¥3790.0
SE
AMITTARI LTMS-10K Wire Tensifier, Yarns, Fibers, Wires and Fibers
0~10.0kgf 0~98N 0~22Lbf0.01kgf 0.1N 0.1Lbf+/- 1.5% or better

¥2340.0
SE
AMITTARI AC-112CS Coating Thickness Gauge Iron-based aluminum-based dual-use Film thickness meter Single button
4-Bit digital backlight LCD0~1250µm/0~50mil (Miscellaneous Measurement range can be customized)0.1 µm (below 100 µm) 1 µm (above 100 µm) 0.1 mil

¥1750.0
SE
AMITTARI AC-112-200NF Coating Thickness Gauge Aluminum-based Film Thickness Gauge
0.1um+/- (1% n~ 3% n) or +/- 2.5um0um~200um

¥3470.0
SE
Digital Pasteur Hardness Gauge AMITTARI HBa-1 used in aluminum processing industry
Pap Hardness Value HBa (Miscellaneous Hardness can be calculated by experimental Linear dispersion)0~100 HBa, equivalent to 25~ 135 HBW0.1Hba

¥3180.0
SE
AMITTARI AS-120C Digital Shore Durometer Rubber plastic Hardness Gauge
0.79 truncated cone>90B；<20DLCD display

¥1640.0
SE
Sand blasting shot peening Roughness Gauge AMITTARI AR-131A shot peening sand blasting, printing anti-corrosion and other industry tests
digital0~750μm0.1μm|1μm

¥2300.0
SE
AMITTARI ARM-216 hiding ratio 450nm Light source reflectance meter
0~1000.1±1

¥2750.0
SE

Recommended for more brochure