China

Bante903P-CN Portable multiparameter STIP-scan

SE
A high-performance portable pH Dissolved Oxygen Meter with three measurement functions for outdoor measurement of pH, mV, Oxidation-reduction potential (ORP), dissolved oxygen concentration and saturation.
$526.00/set
PromotionLoading...
Coupon
Certificate
Contact
Details SPEC Con CAT OI
Similar products

Bante Bante903P-CN Portable Multi-Parameter Water Quality MeterSPEC

Bante Bante903P-CN Portable Multi-Parameter Water Quality MeterDetails

Bante Bante903P-CN Portable Multi-Parameter Water Quality MeterPacking list

SKU
NB014745
pH Measurement range
-2.000~20.000pH
pH measurement Accuracy
±0.002pH
pH resolution
0.1, 0.01, 0.001pH, optional
pH calibrating point
1 to 5 point
pH calibrating solution
USA, NIST, DIN, custom
pH temperature compensation range
0~100°C, 32~212°F
pH temperature compensation
Manual/Automatic
ORP Measurement range
±1999.9mV
mV measurement Accuracy
±0.2mV
mV resolution
0.1, 1mV, optional
mV calibrated point
1 point (only for R.mV mode)
mV calibrated range
±200mV
DO range
0.00~20.00mg/L
DO measurement Accuracy
±0.2mg/L
DO resolution
0.1, 0.01 mg/L, optional
DO temperature compensation range
0~50℃
DO temperature compensation
automatic
Pressure compensation range
60.0~112.5kPa, 450~850mmHg
Salinity compensation range
0~50g/L
DO% Measurement range
0.0~200.0%
DO% measurement Accuracy
±2.0%
DO% resolution
0.1%
Temperature Measurement range
0~105℃, 32~221℉
Temperature measurement Accuracy
±0.5℃
temperature resolution
0.1℃
Temperature calibrating point
1 point
Temperature unit
℃, ° F, optional
Data stability condition
Fast or high precision
Calibrated reminder
1 to 31 days or closed
shutdown mode
Manual or automatic (10, 20, 30 minutes after no button operation)
data storage
500 groups
Communication interface
USB
Connector
BNC, 6-pin MINI Connector
Power
3 AA batteries
Battery life
About 150 hours (when the LCD backlight is turned off)
Dimensions
170*85*30mm
Instrument Weight
300g
Optional accessories
P11 type pH electrode, P11-LiCl type pH electrode, P11-HA type pH electrode, P11-NA type pH electrode
Optional accessories
P12 type pH electrode, P13 type pH electrode, P15 type pH electrode, P16 type pH electrode, P18 type pH electrode, P19 type pH electrode, P21 type pH electrode, P22 type pH electrode
Optional accessories
TP-10K temperature probe, DO100 type dissolved Oxygen electrode, pH standard buffer reagent (USA standard), pH standard buffer reagent (NIST standard), dissolved Oxygen electrode filling solution, dissolved Oxygen electrode membrane cap
Packaging Dimensions
430*310*100mm
Encasement Weight
2kg
Bante903P-CN
Portable Multi-Parameter Water Quality Meter
A high-performance portable pH Dissolved Oxygen Meter with three measurement functions for outdoor measurement of pH, mV, Oxidation-reduction potential (ORP), dissolved oxygen concentration and saturation.
Bante903P-CN Portable multiparameter STIP-scan Picture

Bante903P Portable pH/Dissolved Oxygen Meter

Multi-parameter portable pH meter, including 3 measurement functions, the meter is suitable for outdoor measurement of liquid pH, redox potential, dissolved oxygen concentration and saturation.

pH Mode Features

• Multi-parameter Water Quality Analyzer with large backlit LCD display.

• 1 to 5 point key calibration, automatic identification of pH standard buffer.

• Optional pH buffer standard (USA/NIST/DIN) or 2-point custom calibration.

• Automatic electrode slope display, prompting the user whether to replace the pH electrode.


Portable pH Meter

Functional characteristics of ORP mode

• 1-point offset calibration, allowing adjustment of displayed values to known standards.

• Relative and absolute mV modes provide accurate ORP readings.

Dissolved Oxygen Mode Features

• 1 or 2 point pushbutton calibration using air saturated water or zero oxygen liquid.

• Compensation for salinity and atmospheric pressure to improve the measurement accuracy of the instrument.


Portable pH Meter

common features

• Automatic temperature compensation to ensure accurate measurement over the full range.

• Automatic Calibration Reminder to remind users to calibrate the meter on a regular basis.

• Automatic end point locking, retaining stable measurement values for easy viewing and recording.

• Automatic electrode diagnosis, you can check the zero offset and electrode slope.

• The system menu can customize 11 functional parameters such as the number of calibration points, stability standard, data lock mode, and automatic shutdown.

• One key reset (Reset) automatically restores the instrument to the factory default settings.

• Expanded memory can store up to 500 sets of measurement data.

• The built-in clock automatically marks the date and time of stored data to comply with GLP regulations.

• USB communication interface to send stored data to PC.

• Multi-mode power supply scheme (battery, power adapter, computer's USB port) ensures the smooth application of the instrument.

FAQ
QWhat does cn mean after STIP-scan?
A With China electrode, UK is with the import electrode.
QHow to calibrate STIP-scan temperature?
A Specific operations: 1. Ensure that the temperature probe is connected to the meter; 2. Press and hold the ℃ key for 3 seconds, the meter enters the temperature calibrate mode, and the screen displays the current temperature value; 3. Press up or down to set the temperature value; 4. Press the enter key to confirm, the calibrate is complete.
QThe screen displays --- what is the reason?
A There are two possible reasons: 1. The electrode Sensors are too drying, which can be solved by immersing in tap water for 10 minutes; 2. Measured value Excessive range: Check whether the Sensors are clean and not contaminated.
QThe difference between CN and UK
A One is a Chinese electrode, the other is an imported electrode
Standard
Filter Brand Store Contact