Bante902-UK Precision pH/conductivity /TDS/salinity/resistivity meter

Bante902-UK

Multiparameter Water Quality Analyzer

Simultaneous measurement of pH, conductivity, TDS, salinity value, automatic electrode slope display, automatic temperature compensation and calibrating reminder, support one key reset.

Bante902 Precision pH/Conductivity/TDS/Salinity Meter

Multi-parameter laboratory pH meter, including 6 measurement functions, built-in system menu can customize 12 functional parameters, the meter is suitable for measuring liquid pH, redox potential, conductivity, total dissolved solids, salinity and resistivity values .

pH mode features:

• Multi-parameter Water Quality Analyzer with large backlit LCD display.

• 1 to 5 point key calibration, automatic identification of pH standard buffer.

• Optional pH buffer standard (USA/NIST/DIN) or 2-point custom calibration.

• Automatic electrode slope display, prompting the user whether to replace the pH electrode.

ORP mode features:

• 1-point offset calibration, allowing adjustment of displayed values to known standards.

• Relative and absolute mV modes provide accurate ORP readings.

laboratory pH meter

Conductivity/TDS/salinity/resistivity mode features:

• 1 to 5 point key calibration, automatic identification of conductivity standard solution.

• Selectable cell constant (K=0.1/1/10), TDS conversion factor, normalized temperature (20 or 25°C), linear and pure water temperature compensation, seawater and practical salinity measurement modes.

General features:

• Automatic temperature compensation to ensure accurate measurement over the full range.

• Automatic Calibration Reminder to remind users to calibrate the meter on a regular basis.

• Automatic end point locking, retaining stable measurement values for easy viewing and recording.

• Automatic electrode diagnosis, you can check the zero offset, electrode slope and conductivity K value.

• The system menu can customize 12 functional parameters such as the number of calibration points, stability standard, data lock mode, and automatic shutdown.

• One key reset (Reset) automatically restores the instrument to the factory default settings.

• Expanded memory can store up to 500 sets of measurement data.

• The built-in clock automatically marks the date and time of stored data to comply with GLP regulations.

• USB communication interface to send stored data to PC.

Packing list：Host X1, Conductivity detector standard solution (84 µS/cm, 1413 µS/cm, 12.88mS/cm) X1, K10 type Conductivity detector electrode (made in UK) X1, P11 type pH electrode (made in UK) X1, TP-10K temperature probe X1, DC5V power adapter X1, USB cable X1, Conductivity detector standard solution (84 µS/cm, 1413 µS/cm, 12.88mS/cm) X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.