China

SHENGTIAN TECHNOLOGY 36 Dyne pen surface tension 36

SHENGTIAN TECHNOLOGY 36 Dyne pen is made up of 11.50% ethylene glycol ether and 8.50% methyl amide, and the 36 dyne value is suitable for solvent printing ink and UV printing ink.
Model：
Certificate
Contact
Details SPEC

Shengtian 36 Dyne penSPEC

Shengtian 36 Dyne penDetails

Shengtian 36 Dyne penPacking list

SKU
NB015119
Model
36
Color
blue
36
Dyne pen
SHENGTIAN TECHNOLOGY 36 Dyne pen surface tension 36 Picture

Introduction

Shengtian Technology 36 Dyne PenDyne Pen can accurately test plasticsFilms, metals, ceramics and all other materialsWhether the surface tension reaches the value of the test pen. It can make the user clearly understand whether the film is suitable for printing. Composite or vacuum aluminization. Effectively control the quality and reduce the tool delay caused by the substandard material.

Shengtian Technology 36 Dyne pen display diagram

Shengtian Technology 36 dyne pen


Applicable Materials

It is widely used on the surface of all materials such as films, metals, ceramics, etc Tension test

Features

The water output is uniform, the quality is stable, the test is accurate, and the cost performance is high



FAQ
QHow do I use the Dyne pen?
A Hello, observe whether more than 90% of the ink strip edges cissing and forming ink droplets within 2 seconds. If so, replace the ink with a lower surface energy and then brush the ink strip.
QWhat is the dyne water composition of Dyne pen 36?
A Hello, 36 Dyne pen is made up of 11.50% ethylene glycol ether and 8.5% methyl amide.
Knowledge