JINGKELIAN QTY-10A cylindrical mandrel bending tester, eight different diameters cylindrical mandrel

QTY-10A

Paint film cylindrical Bending tester

Shaft rod size 2/3/4/5/6/8/10/12mm, surface size 200 × 58 × 14mm, bending shaft material stainless steel.

Overview of QTY-10A Cylindrical Bending Tester

JinKeLianQTY-10A cylindrical bending tester is a bending tester with eight different diameters of 2, 3, 4, 5, 6, 8, 10, and 12mm, and the bending form is hinged connection. QTY-10A cylindrical bending tester meets the requirements of GB6742-86 paint film bending test (cylindrical shaft), and the bending shaft is made of wear-resistant stainless steel.

QTY-10A Cylindrical Bending Tester is suitable for bending tests of paints, varnishes and other coatings during paint production and use.

Features of QTY-10A Cylindrical Bending Tester

1) The surface size of the cylindrical bending tester is 200×58×14mm

2) The material of the bending shaft is stainless steel.

3) The operation is simple and no assembly is required. Each set of eight pieces is marked with the diameter number of the cylinder on the surface of each piece, which is convenient and easy to use.

Maintenance and storage

1. Care should be taken to prevent bumping and deformation

2. If it is not used for a long time, it should be put in the box and stored in a dry and ventilated place

QTY-10A cylindrical bending tester display

Packing list：Paint film cylindrical Bending tester x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.