China

JINGKELIAN QZM Conical paints Coating particles for grinding

SE
Three-phase AC 380 volts 50HZ, Dimension 430 * 250 * 300mm, weight 30Kg, the gap between convex grinding and concave grinding can be adjusted arbitrarily between 0.01 mm and 1 mm, convex grinding Rotation speed 180rpm clockwise.
$537.00/set
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con OI

JingKeLian QZM cone millSPEC

JingKeLian QZM cone millDetails

JingKeLian QZM cone millPacking list

SKU
NB001528
Power
Three-phase AC 380V 50HZ
Overall Dimensions
430*250*300mm
Weight
30Kg
Clearance between convex and concave grinding
Can be adjusted arbitrarily between 0.01 mm and 1 mm
Clockwise speed of convex grinding
180rpm
QZM
cone mill
Three-phase AC 380 volts 50HZ, Dimension 430 * 250 * 300mm, weight 30Kg, the gap between convex grinding and concave grinding can be adjusted arbitrarily between 0.01 mm and 1 mm, convex grinding Rotation speed 180rpm clockwise.
JINGKELIAN QZM Conical paints Coating particles for grinding Picture

Overview of QZM conical mill

JinKeLian QZM conical mill is a special grinding machine for paint particles, which can be used for paint particles of about 100 microns, and the particles should not be larger than 25 microns after grinding for no more than 5 times. QZM conical grinding can freely adjust the gap between convex grinding and concave grinding between 0.01 mm and 1 mm.

QZM cone mill structure

Structural diagram of JinKeLian QZM conical mill

(1) Machine base supporting the whole machine; (2) Electric motor; (3) Transmission; (4) Adjusting bracket; (5) Convex Grinder; (6) Concave Grinder; (7) Clearance adjustment nut; (8) Faucet ; (9) Power switch; (10) Paint board and (11) Plate, etc.

The grinding series uses the motor (2) to drive the convex Grinder (5) to rotate relative to the concave Grinder (6) through the transmission (3), and grinds the paint particles finely by means of the grinding teeth on the convex Grinder and the concave Grinder.

QZM conical mill display

JinKeLian QZM Conical Mill Appearance

Details of JinKeLian QZM conical mill

FAQ
QWhat is the accuracy, volume and Rotation speed?
A This is to add grinding at any time, the gap between convex grinding and concave grinding can be adjusted arbitrarily between 0.01 mm and 1 mm; Rotation speed of convex grinding clockwise: 180 rpm.
QCone grinding accuracy, volume, Rotation speed, how much?
A This is to add at any time grinding, 1, convex grinding and concave grinding between the gap can be arbitrarily adjusted between 0.01 mm~ 1 mm. 2, convex grinding clockwise Rotation speed: 180 rpm.
QCan this cone mill be ground with toner in water?
A Yes, as long as it is liquid, it can be ground.
QGrinding, glue, with matting powder added to it, is that okay?
QI wonder if it has any requirements for Abrasive materials? If it is too thin, will it flow directly?
A Hello, this is mainly related to the fineness of grinding requirements. The thinning of the liquid can be directly adjusted to the gap.
QQZM Conical Grinding Coating grinding to how fine?
A Hello, the particles can be coated by the original paint of about 100 microns, and the particles should not be greater than 25 microns after no more than 5 times of grinding.
Filter Brand Store Contact