China

JUNSHUN YA-D200-Freon, stationary toxic Gas Detector display + acousto-optic

JUNSHUN YA-D200-Freon integrates a display screen and an acousto-optic alarm for rapid Freon detection of gas concentration values. YA-D200-Freon Toxic Gas Detector is a fixed Gas Detector that uses diffusion sampling.
Certificate
Contact
Details SPEC OI

Junshun YA-D200-Freon (display + sound and light) Stationary Toxic Gas DetectorSPEC

Junshun YA-D200-Freon (display + sound and light) Stationary Toxic Gas DetectorDetails

Junshun YA-D200-Freon (display + sound and light) Stationary Toxic Gas DetectorPacking list

SKU
NB016352
Detect gas
Freon
Sensors principle
electrochemistry
Sampling method
diffusion
Display
LED digital tube, OLED LCD screen
Alarm mode
Sound, light.
Range
0~1ppm
detection Accuracy
＜±3%F.S
resolution
0.1ppm
Response time
≤40s
service life
2 years (depending on the environment)
Repeatability
≤±2%
Power Supply
DC24V
power consumption
＜2.5W
Operating temperature
-40~70℃
Environmental humidity
0~95%RH
Explosion-proof sign
ExdⅡCT6
Protection level
IP65
Dimension
140*190*95mm
Weight
1.3Kg
Output signal
Standard: 4-20mA Optional: RS485, switch amount
transmission distance
1200M three-wire system, four-wire system
Connectivity
Standard: M20 * 1.5 internal thread, optional adapter
Shell material
die casting aluminum
Installation method
Fixing bracket, tube mount, wall mount
Adaptation System
Gas alarm Controller; PLC/DCS/RTU Control system; Fire engine
security certification
CMC
execution standard
GB15322.1-2003；GB12358-2006 GB3836.1-2010；GB3836.2-2010 JJG695-2003
YA-D200-Freon (display + sound and light)
Stationary Toxic Gas Detector
JUNSHUN YA-D200-Freon, stationary toxic Gas Detector display + acousto-optic Picture

Overview of Gas Detectors

YA-D200 series freon Detector is a toxic gas alarm developed by Junshun with practical functions and easy operation. The Detector can be selected with or without a display and audible and visual alarm. It can be combined with Junshun's toxic gas alarm controller YA-K100 to form an industrial gas alarm system.

The product adopts wall-mounted installation, through the use of the controller, and through the controller single-chip microcomputer to the Detector uploaded data for various data processing, and finally complete the data display, output control and other functions.

Junshun Electronics YA-D200-Freon (display + sound and light) fixed toxic Gas Detector

The design, manufacture and inspection of this product comply with the following national standards

GB16808-2008 "Combustible Gas Alarm Controller" national standard per 20 square meters

GB12358-2006 "General Technical Requirements for Workplace Ambient Gas Detection and Alcellors"

GB15322.1-2003 Point Combustible Gas Detector with Measurement Range of 0~100% LEL

Features

Sound and light model: (used with YA-K100/200 series gas alarm controller produced by Junshun) The Detector is placed in the scene prone to gas leakage, when there is gas leakage, the Detector will detect the leakage information, and timely transmit the relevant data to the controller, when it reaches a certain concentration, the Detector will send out an audible and visual alarm (about 70 decibels), and the controller sound and light alarm at the same time, prompting the user that the gas leakage has been detected, and relevant measures should be taken in time to eliminate the danger!

FAQ
QDo you have the Gas detector involved in GB15322.1?
A The YA-D200-Freon Gas detector will do
QYA-D200-Freon (display + acousto-optic) Gas detector Sensors principle is electrochemistry?
A Yes, this model Gas detector uses electrochemistry principle. Detect gas Freon
Knowledge
Standard