German erichsen295 lacquered cross-cut knife to test the adhesion of paints Coatings

erichsen295

Cross-cut knife

The erichsen295 paint cross-hatch knife meets all cross-hatch test standards. It consists of a plastic handle and a cutter head mounted on it. The cutter head can be adjusted to the most comfortable position for the operator. Different types of cutter heads are available and a tape according to EN ISO 2409 is available.

The erichsen 295 cross-cutting instrument is supplied complete, including a cutter head mounted on a plastic handle. Comes in a sturdy plastic carrying case and also contains a nylon brush and a 2.5x magnifying glass. For the 295/III single-edged blade, a folding rule is also provided. The instrument also comes with manufacturer's certificate M.

1.After 1994, the European standard ENISO2409 replaced the national standards DIN53151, BS3900: E6, NFT30-38, NEN5337 and SIS184172.

2. After the cross-hatch test, you can also do a deep drawing test (ENISO1520). Deep drawing experiments can be completed with the following instruments:

ERICHSEN cupping Tester, model 200, 202, 202C or 204

Impact test device 304ECCA compliant with ASTM D3359

3. For soft substrates.

4. For hard substrates.

Packing list：

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.