Germany EPK MikroTest F6 McCourt Coating Thickness Gauge: 0~1000μm

MikroTest F6

McCourt platings Thickness Gauge

Introduction

The German EPK MikroTest F6 McCourt Coating Thickness Gauge accurately and error-free measures the thickness of paint and plating layers on steel.

MIKROTEST Coating Thickness Gauges measure the thickness of all non-magnetic coatings on steel (e.g. paint, powder coating, plastic, zinc, copper, tin and nickel). Fast, accurate and non-destructive, MICROTEST has been the most widely used instrument for the automatic determination of coating thickness for more than 30 years. Germany's "know-how" shows that it has the highest level of magnetic cladding Thickness Gauge in terms of process technology and precision.

Features

MIKROTEST has the following features and advantages:

1) Automatic measurement will not occur misoperation;

2) Simple setup and measurement;

3）No calibration required;

4）No batteries or other power sources are required;

5）Automatically report the thickness reading;

6）With a non-destructive probe, a little bit of measurement;

7）The metal armor is suitable for frequent outdoor operation and use, and is protected from mechanical impact;

8）Resistant to mechanical shock, acid and solvent corrosion;

9）The balancing device eliminates the influence of gravity and can accurately measure in any direction and in the tube.

Apply standards

The EPK MikroTest F6 McCourt Coating Thickness Gauge complies with DIN EN ISO2178, DIN 50982, ASTM B 499, E 376, ASTM D 1186, ASTM G12, ASTM B 530, BS5411, ISO2361 standards.

Display diagram

Comparison of EPK MikroTest coating Thickness Gauge series

Packing list：

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.