CHIJIU MYP13-2S Single Stirring Magnetic Stirrer Stirring capacity up to 5000ml

MYP13-2S

Magnetic Stirrer

Product Description

This MYP13-2S magnetic stirrer is a single-stirring magnetic stirrer. The shell is die-cast from corrosion-resistant engineering plastics. The working surface is made of stainless steel. It is controlled by a three-phase brushless DC motor in a closed loop. The speed is stable and equipped with powerful magnets. The stirring force is strong and the LED speed display is displayed. , suitable for single mixing occasions with smaller capacity.

Product display

Instructions

1. Place the mixer stably, plug in the power, place the beaker containing the liquid medicine on the working point of the mixer, and put in a stirrer. The bottom of the beaker should be flat to avoid affecting the operation of the stirrer.

2. Turn the knob from off to on. The LED will first display 1.2.3.4. Then O will be displayed. Slowly adjust the knob clockwise. The stirrer in the beaker will stir the liquid from slow to fast. Select the required stirring speed. Finally, the MYP13-2S magnetic stirrer is ready to work.

3. After use, turn the knob counterclockwise to off, unplug the power plug, clean the surface, and keep it properly.

Precautions

1. The liquid in the beaker should not be overfilled to avoid overflowing during stirring.

2. When inserting the benchmark into the benchmark hole at the back of the machine, apply force vertically downward on the round end. It is forbidden to shake and force downward at the same time, and it is also forbidden to shake and pull out the standard when removing it.

Packing list：

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.