Wire-wound, wet film thickness 41.1 μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, hand width 50 + 50mm, material stainless steel, Wire diameter 0.46mm.
Packing list:Stainless Steel Rod X1 Transparent Encasement Hose X1
[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
QDo you need to choose a handle for RDS Mayer Rods?
A
No, there are 5cm hand grips at both ends.
QHow long are these 2 sticks?
A
RDS wire rod is 40cm total length, application width 30cm.
QUnderstand the next wire rod, which model do you use around 40um?
A
RDS line 18 stick is enough.
QFood Encasement Plastic film with a layer of inks with what coating rod number?
A
Different film film thickness requirements are different. The film on Encasement is relatively thin, which can be defined in detail through the NBchao Mayer Rods selection tool or consulting customer service. You can also apply for a trial through NBchao.
QThe one I used to apply to the film, about 40 microns, which rod number did I use?
A
Hello, you can use the No. 18 stick of RDS.
QScratch water-based paints, can this RDS Spreader be used?
A
Hello, it's okay.
QWhat is the diameter of RDS 18 #3/8 "Mayer Rods?
A
Hello, the rod diameter is 9.5mm.
QCan this RDS Film Applicator rod be used for water-based paint?
A
Hello, yes, this film Film thickness is 41.1μm, see if it meets your experimental film Film thickness requirements.
QDoes NBchao have imported 18 #wire rods?
A
Hello, yes, there are American RDS and Japanese OSP.
Q1 square meter of 5 grams of Spreader, which wet film rod do you buy?
A
You need to know the solid content before you can suggest it for you.