LEICI DDS-307A Laboratory Conductivity Meter Test conductivity /TDS/temperature

Conductivity Meter

Introduction

The DDS-307/307A laboratory conductivity meter is suitable for electrode constants of 0.1 and 0.01 respectively, and the electrodes equipped with both are JDS-1 platinum black conductivity electrodes, which can effectively increase the motor area, reduce the electrode polarization, and make the measurement more accurate and stable. thereintoThe DDS-307A is equipped with a temperature sensor that can automatically compensate for the temperatureDDS-307 can only manually compensate the measured temperature to maintain the temperature of the experimental environment to meet the requirements and avoid errors in the measurement results. In addition, the conductivity meter can be used for measuring high-purity water with 0.01 cm^-1Measuring grooves for titanium alloy electrodes and tightness.

Thunder Magnetic DDS-307A can test conductivity, TDS, temperature, andThe DDS-307 can only test conductivity values.

Features

1、DDS-307AlaboratoryThe conductivity meter has two temperature compensation methods: automatic and manual.The DDS-307 can only be manually temperature compensated.

2. Large LCD screen, digital display of measurement data, clear and intuitive.

3. The equipped electrode is DJS-1C platinum black conductive electrode.

4. It can measure high-purity water, but it needs to be used0.01cm^-1Conductivity is often familiarof titanium alloy electrodes and sealing grooves.

5. The temperature compensation coefficient is 2% by default

6、DDS-307AlaboratoryThe conductivity meter is measurableConductivity, TDS, temperature three values, whileDDS-307 only measures conductivity.

Applications

Thunder Magnetic DDS-307AlaboratoryConductivity meterWide range of applicationsIn power plants, water plants, chemicals, papermaking, food, electroplating and other fields.

Actual picture of the product

Packing list：

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.