TEC MC3000F/N dual-use Film Thickness Gauge 0~1200um

MC3000F/N

Dual-use Coating Thickness Gauge

Introduction to MC3000F/N dual-purpose coating Thickness Gauge

The MC-3000 Iron/Non-Iron-Based Coating Thickness Gauge with N\F probes cleverly combines an eddy current Thickness Gauge with a coating Thickness Gauge. Depending on the needs of the site, users can choose from a ferromagnetic Thickness Gauge or eddy current Thickness Gauge to measure the coating thickness on magnetic or non-magnetic metals. This greatly increases the range of applications of the instrument. This type of coating Thickness Gauge can not only conveniently and non-destructively measure the thickness of non-magnetic coatings on ferromagnetic materials, such as zinc, copper, chromium and other coatings on the surface of steel or the thickness of paint, enamel, fiberglass, spraying, asphalt and other coatings. It can also conveniently and non-destructively measure the thickness of non-conductive overlays on non-magnetic metal substrates, such as paints, rubbers, plastics, oxide films, etc. on metals such as copper, aluminum, zinc, tin, etc. The instrument is widely used in machinery, automobile, shipbuilding, petroleum, chemical, electroplating, plastic spraying, enamel, plastic and other industries. This model coating Thickness Gauge adopts a unique automatic deviation tracking technology to make the measured value more accurate, the probe is processed according to German process standards, and the use of new alloy materials greatly improves the service life and accuracy of the probe.

Product performance

• MC-3000 Iron-based\Non-Iron-based Coating Thickness Gauge Performance Index:

• Basic measurement modes: Regular mode, Minimum mode, Statistical mode.

• Monitoring and measurement mode: the difference can be set, and the upper and lower limit alarm settings can be set.

• You can choose to delete a single piece of stored data, or a group of data, or clear all data.

• Zero-point calibration, two-point calibration, and system calibration are possible.

• The shutdown mode can be set, the backlight is turned on or off, and the factory state can be restored.

• You can print stored values as well as statistical values.

• There are 6 groups of data stored in groups, and each group stores 99 measurement points.

• Stored measurements can be viewed in groups.

MC-3000 Iron-based/Non-Iron-based Coating Thickness Gauge Configuration Sheet

Standard configuration: main unit, Fe probe, NF probe, standard sample, manual, warranty card, certificate, No. 5 battery, suitcase. 

Optional : printer and communication printing cable, microcomputer communication software, internal anti-corrosion probe

Packing list：

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.