YUHUA DHG-9920 Electric blast oven temperature control: 250 ℃ Volume: 1000L

DHG-9920

Forced Air Drying Oven

Introduction

Electric Forced Air Drying Oven is also known as "oven", as the name suggests, the use of electric heating for blast circulation drying test, divided into blast drying and vacuum drying, blast drying is through the circulation fan to blow out hot air, to ensure the temperature balance in the box, vacuum drying is the use of Vacuum Pump to pump out the air in the box, so that the atmospheric pressure in the box is lower than the normal pressure, so that the product in a very clean state to do the test, is a commonly used instrument and equipment, mainly used to dry samples, can also provide the temperature environment required for the experiment. Drying ovens are used in various industries such as chemical, foundry, automobile, food, machinery, etc. The inner tank is made of stainless steel, analogue and digital, natural convection and blast circulation, conventional oven and vacuum type.

Features

● The inside of the box is made of mirror stainless steel argon arc welding, and the outside of the box is made of good steel plate, which is beautiful and novel in appearance.

● Microcomputer P.I.D. temperature controller with over-temperature deviation protection and digital display is adopted, with timing function, and the temperature control is accurate and reliable.

● The hot air circulation system is composed of a fan that can run continuously at high temperature and a suitable air duct to improve the temperature uniformity in the studio.

● The new synthetic silicon sealing strip is adopted, which can operate at high temperature for a long time, has a long service life and is easy to replace.

● The air intake and exhaust volume in the box can be adjusted from the temperature control panel.

Packing list：machine X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.