DAHOMETER AR-300GY Solid Liquid Dual-use Density Tester, weighing 300g
AR-300GY
DahoMeter AR-300GY Density TesterSPEC
DahoMeter AR-300GY Density TesterDetails
DahoMeter AR-300GY Density TesterPacking list
- SKU
- NB017818
- Weighing range
- 0.005~300g
- Density Accuracy
- 0.001g/cm³
- Density range
- Density > 1, < 1 can be tested
- Measurement principle
- Archimedes principle General test method for solids (solids)
- Measurement time - solid
- About 5 seconds
- Memory method
- Two-step memory method (solid)
- Specific gravity measurement stand - solid
- Integrated injection molding professional specific gravity measurement rack (size: length 17.6 cm × width 10.5 cm × height 11.1cm)
- Measurement tank - solid
- Integrated injection molding professional transparent sink (size: length 16.9 cm × width 9.8 cm × height 8.3cm)
- The result shows
- Density, Volume, content percentage (solids)
- Parameter Setting - Solid
- Water temperature setting, Measuring medium density setting, Material main material and secondary material density setting
- Material Blend Percentage - Function Introduction
- Automatic reading of the main substance percentage of the two mixed materials
- Material Blend Percentage - Set
- Can freely set the density value of material primary and secondary substances
- Material Mix Percentage - Display
- Density value, mixing ratio of main substances
- Measurement type
- Any liquid can be measured
- Measurement principle
- Archimedes principle substitution method (liquid)
- Measurement mode
- 1 set (liquid)
- Measurement time - liquid
- Instant measurement
- Memory method
- Dynamic Memory (Liquid)
- The result shows
- Density (liquid)
- Specific gravity measurement stand - liquid
- Stainless steel specific gravity measurement stand
- Parameter Setting - Liquid
- Temperature setting, solution density setting, standard measurement Weight Weight value and water Weight value setting
- result verification method
- Distillation water verification (liquid)
- Correction method
- Single button automatic correction, automatic detection function
- Power supply Voltage
- AC 220V/50HZ
Introduction
AR series density meter is a new series of products launched by DahoMeter brand based on many years of density measurement technology, through functional simplification, optimization of structure, and enhancement of practicality...... and other features.
Application
Density measurement in the fields of glass products, cemented carbide, metal products, jewelry industry, powder metallurgy, fine ceramics, refractory materials, magnetic materials, alloy materials, mechanical parts, minerals and rocks, cement manufacturing, metal recycling, rubber, plastics, wires and cables, tires, chemical solutions, modern energy, petroleum fuels, fine chemicals, chemical reagents, chemical research laboratories, new materials research laboratories, etc.
Features
Solid Features & Benefits:
Any solid can be measured
There is no cumbersome operation and it is easy to install
Water is used as a medium, but other liquid media can also be used
Large-capacity PC sink
It has the function of actual water temperature compensation
Equipped with a special windproof and dustproof cover
It can be adapted to workshops, laboratories and other places
Liquid Features & Benefits:
Any solution can be measured quickly
There is no cumbersome debugging and operation of Wechsler balance method and pycnometer method
It has the function of actual water temperature compensation
SAMPLING IS CONVENIENT, AND ONLY 50CC OF THE SAMPLE IS MEASURED
The operation is done in one step, which is convenient for multiple consecutive rapid tests
Volatile liquids, corrosive liquids, viscous liquids, strong acids and alkaline liquids can all be quickly measured (optional accessories)
Serial models
| Model | AR-300GY | AR-600GY | AR-900GY | AR-1200GY | AR-2000GY | |
| Weighing range | 0.005~300g | 0.005~600g | 0.01-900g | 0.01~1200g | 0.01~2000g | |
| Density accuracy | 0.001 g/cm3 | |||||
| Density range | Density >1, <1 can be measured | |||||
| Solid mode | Measure the type of solids | Any solid density | ||||
| Measurement mode | Archimedes' principle, universal test method for solids | |||||
| Measure the time | About 5 seconds | |||||
| Ways to memorize | Two steps to memorize | |||||
| Specific gravity measuring rack | One-piece injection molding professional gravity measuring frame (dimensions: length 17.6 cm× width 10.5 cm× height 11.1 cm) | |||||
| Measure the sink | One-piece injection molded professional transparent sink (dimensions: length 16.9 cm× width 9.8 cm× height 8.3 cm) | |||||
| The results are displayed | Density, volume, content percentage | |||||
| Function settings | Water temperature setting, measuring medium density setting, material primary material and secondary material density setting | |||||
| Percentage of material mix | Function: The percentage of the main substances of the two mixed materials can be automatically read | |||||
| Setting: The density value of the primary and secondary substances of the material can be set freely | ||||||
| Display: density value, mixing ratio of major substances | ||||||
| Liquid mode | Measure the type of liquid | Any liquid can be measured | ||||
| Principle | Archimedes' principle of substitution | |||||
| Measurement mode | 1 group | |||||
| Measure the time | Instant measurements | |||||
| Ways to memorize | Dynamic memory | |||||
| The results are displayed | density | |||||
| Specific gravity measuring rack | Stainless steel specific gravity measuring frame | |||||
| Function settings | Temperature setting, solution density setting, standard weight weight setting and weight setting in water | |||||
| How the results are verified | Distilled water validation | |||||
| Correction method | One-button automatic correction and automatic detection function | |||||
| power supply | AC~220V / 50HZ | |||||
Serial models
| brand | DahoMeter | ||||||
| Model | AR-300GY | AR-600GY | AR-900GY | AR-1200GY | AR-2000GY | ||
| Weighing range | 0.005~300g | 0.005~600g | 0.01-900g | 0.01~1200g | 0.01~2000g | ||
| Density accuracy | 0.001 g/cm3 | ||||||
| Density range | Density >1, <1 can be measured | ||||||
| Solid mode | Measure the type of solids | Any solid density | |||||
| Measurement mode | Archimedes' principle, universal test method for solids | ||||||
| Measure the time | About 5 seconds | ||||||
| Ways to memorize | Two steps to memorize | ||||||
| Specific gravity measuring rack | One-piece injection molding professional gravity measuring frame (dimensions: length 17.6 cm× width 10.5 cm× height 11.1 cm) | ||||||
| Measure the sink | One-piece injection molded professional transparent sink (dimensions: length 16.9 cm× width 9.8 cm× height 8.3 cm) | ||||||
| The results are displayed | Density, volume, content percentage | ||||||
| Function settings | Water temperature setting, measuring medium density setting, material primary material and secondary material density setting | ||||||
| Percentage of material mix | Function introduction | The percentages of the main substances in the two mixtures can be automatically read | |||||
| Set | The density values of the primary and secondary materials of the material can be set freely | ||||||
| display | Density value, mixing ratio of main substances | ||||||
| Liquid mode | Measure the type of liquid | Any liquid can be measured | |||||
| Principle | Archimedes' principle of substitution | ||||||
| Measurement mode | 1 group | ||||||
| Measure the time | Instant measurements | ||||||
| Ways to memorize | Dynamic memory | ||||||
| The results are displayed | density | ||||||
| Specific gravity measuring rack | Stainless steel specific gravity measuring frame | ||||||
| Function settings | Temperature setting, solution density setting, standard weight weight setting and weight setting in water | ||||||
| How the results are verified | Distilled water validation | ||||||
| Correction method | One-button automatic correction and automatic detection function | ||||||
| Standard accessories | A host unit, a tweezer, a thermometer, a weight, a set of windproof and dustproof covers, a solid Water Tank, a solid measuring table, a set of particle measuring devices, a set of floating body accessories, a liquid measurement board, a liquid measurement bracket, a set of AR-20A standard liquid measurement components, and a power transformer | ||||||
| Optional | (1) AR-40 printer, (2) AR-20B anti-corrosive liquid measurement kit, (3) AR-20A standard liquid measurement kit | ||||||
| power supply | AC~220V / 50HZ | ||||||
- 1Overview of Two Densitometers for Coal Preparation
杜振宝;路迈西;涂照妹;毛吉献 - 《矿山机械》
- 2Densitometer calibrating and Measurement
吴德贵;赵海超;冯海平 - 《石油工业技术监督》
- 3Concept and classification of Densitometer
宁红娜;倪旭翔 - 《光学仪器》
- 4Introduction of Four Structures of Color Densitometer
宁红娜;倪旭翔 - 《光学仪器》
- 5Determination Principle of Vibratory Densitometer
陈赓良 - 《石油管材与仪器》
- 6Comparison of Isotope Densitometer and Cy Differential Pressure Densitometer
杜振宝;路迈西;涂照妹;毛吉献 - 《矿山机械》
- 7Methods to improve the accuracy of Densitometer calibrated results
梁秀丽;王建国;王旭华;王学琴;张坤梁旭 - 《计测技术》
- 8Density measurement method basic knowledge
Siegfried Hold
- 9Comparison of Densitometer, Colorimeter and Spectrophotometer Color measuring instruments
宁红娜;倪旭翔 - 《光学仪器》
- 10Rapid Determination of Ammonium Perchlorate Solution Concentration by Densitometer and Thermometer
王万远;王振国;赵晓勇 - 《化学推进剂与高分子材料》