YIHENG MJ-250F-ⅰ Mold Incubator temperature control 0~60 ℃

Mold Incubator

In line with the world's environmental protection trend, international brand compressors and circulating fans, effective and low energy consumption, not only promote energy saving, but also have a long service life, can reduce noise to a minimum, and reduce the cooling time by more than 40% compared with traditional low-temperature equipment.

Overview of uses

It is suitable for environmental protection, drug testing, agricultural and livestock, aquatic products and other scientific research, universities and production departments. It is a special constant temperature equipment for water analysis and BOD determination, and for the cultivation, preservation, plant cultivation and breeding test of bacteria, molds and microorganisms.

Features

● Mirror stainless steel liner with four corners and semi-circular arc design, easy to clean, and adjustable spacing between shelves in the box.

● International brand compressor, using environmentally friendly refrigerant (R134a), effective, low energy consumption, promote energy saving.

● Microcomputer PID temperature controller, accurate and reliable temperature control, less fluctuation, with timing function.

● Three-speed control of circulating fan speed to avoid the volatilization of samples caused by excessive air volume during the test.

● It is equipped with an independent temperature limit alarm system, which will be automatically interrupted when the limit temperature is exceeded, so as to ensure the safe operation of the experiment and no accidents. (Optional)

● With printer or RS485 interface, it can be connected to the printer and computer, and can record the change of temperature parameters. (Optional)

● LCD screen display, menu-based operation. (This feature is available with an "F" in the model number)

Options:(Option lead time increased by 7 days)

1. Multi-segment programmable temperature controller (biochemical, mold type I)

     Multi-stage Programmable Temperature and Humidity Controller (Mold Type II)

2. Embedded printer

3. Paperless Recorder

4. Independent temperature limiting controller

5. Left side diameter 25mm test hole (50mm above 500 liters)

6. BOD socket

7. RS485/232 interface and communication software

Packing list：

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.