Erichsen463 Scratch meter

erichsen463

Scratch meter

The Model 463 scratch meter consists of a carbide cutter, guided by a fixed bracket and handle. In the standard type, the cutting blade is rectangular with a width of 1mm. The cutting blade can be adjusted horizontally by raising or lowering it using a locking screw. 0.5mm carbide cutters can also be provided according to customer requirements.

Test principle

This scratch meter is used to produce specific damage on coating-covered specimens to be subjected to corrosion testing. The corrosion test can use the salt spray test in accordance with DIN 50 021 standard. Erichsen type #606 and #608, #616 can perform this test.
This method provides a criterion for evaluating the impact of corrosion beneath the coating and its impact on adhesion. The length of lateral damage under the coating can be used as an indicator of corrosion protection.

Packing list：Cross-cut knife x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.