China

PUSHEN Zahn 3 #Zahn Cup Zahn Cup

SE
Viscosity range 100-800cSt; nozzle diameter 3.8mm; portable; stainless steel; meets ASTM D4212 standard.
Model：
Certificate
Contact
Details SPEC VIDEO CAT OI
Similar products

Pushen Zahn-3# Zahn CupSPEC

Pushen Zahn-3# Zahn CupDetails

Pushen Zahn-3# Zahn CupPacking list

SKU
NB018123
Viscosity range
100~800cSt
outflow time
20~80s
Flow hole diameter
3.8mm
Cup body material
stainless steel
Filter material
stainless steel
Handle material
stainless steel
Applicable standard
ASTM D4212
Environment temperature
25℃±0.2℃
Certificate
without
Zahn-3#
Zahn Cup
Viscosity range 100-800cSt; nozzle diameter 3.8mm; portable; stainless steel; meets ASTM D4212 standard.
PUSHEN Zahn 3 #Zahn Cup Zahn Cup Picture

Zahn Cup

It can be used anywhere in factories, workshops and laboratories to quickly check the viscosity of fluids.

Each cup has a 30 cm long ring handle that can be held by hand to submerge the cup in the liquid.

There is a ring in the center of the handle to keep the cup vertical during the test.

Pushhen Zahn-3# Zahn Cup Details Figure 1

Pushen Zahn-3# Zahn Cup Details Picture 2

Pushhen Zahn-3# Details of Zahn Cup 3

Standards

ASTM D 4212

Comparison of parameters of PS ZAHN Cup series

modelcup numberoutflow apertureMeasuring rangeoutflow time
PS 1024/1number 125-6035-80
PS 1024/2number 22.720-25020-80
PS 1024/3number 33.8100-80020-80
PS 1024/4No 44.3200-120020-80
PS 1024/5Number 55.3400-180020-80
Unit: mm, cSt, s
Other parameters
StandardsASTM D 4212
materialStainless steel
FAQ
QDoes the Zahn-3 #Zahn Cup come with a calibrated certificate?
A No.
QEnvironmental temperature requirements for viscosity determination using Zahn Cup?
A 25℃±0.2℃。
QWhat is the material of Zahn-3 #Zahn Cup?
A The body, filter and handle of the Zahn-3 #Zahn Cup are made of stainless steel to ensure durability and corrosion resistance.
QWhat material is this Zahn Cup from PUSHEN? Is it suitable for workshop use?
A Hello, it is made of stainless steel. This portable Cai'en viscosity cup is generally used for viscosity testing on production lines and workshops.
QWhat is the aperture at the bottom of the Pushen No. 3 cup?
A Hello, the aperture is 3.8mm.
QHello, this kind of Cai'en cup must be vertical to measure accurately during operation?
A Hello, this Zahn cup must be vertical during operation, so that the measured value is accurate. There is a circular ring in the center of the handle of this Zahn cup, which is convenient for the cup body to be vertical during the test.
QHello, would you like to ask the difference between zahn3 and zahn4?
A Hello, the main difference between zahn3 and zahn4 is that the outflow aperture of 3 #is 3.8mm, the outflow aperture of 4 #is 4.3mm, the measurement range of 3 #is 100~ 800cst, and the measurement range of 4 #is 200~ 1200cst.
QMeet ASTMD1084 Zahn Cup
A Zahn-3 #Zahn Cup, please refer to it.
QPrinting ink printing viscosity measurement, this one applies?
A Yes, Printing ink printing general viscosity can be applied to No. 3 zahn cup
Knowledge
Standard