China

PUSHEN Zahn-5 #Zahn Cup Zahn Cup

SE
Viscosity range 400-1800cSt; nozzle diameter 5.3mm; portable; stainless steel; meets ASTM D4212 standard.
Model：
Certificate
Contact
Details SPEC VIDEO CAT OI
Similar products

Pushen Zahn-5# Zahn CupSPEC

Pushen Zahn-5# Zahn CupDetails

Pushen Zahn-5# Zahn CupPacking list

SKU
NB018125
Viscosity range
400~1800cSt
outflow time
20~80s
Flow hole diameter
5.3mm
Cup body material
stainless steel
Filter material
stainless steel
Handle material
stainless steel
Applicable standard
ASTM D4212
Environment temperature
25℃±0.2℃
Certificate
without
Zahn-5#
Zahn Cup
Viscosity range 400-1800cSt; nozzle diameter 5.3mm; portable; stainless steel; meets ASTM D4212 standard.
PUSHEN Zahn-5 #Zahn Cup Zahn Cup Picture

Zahn Cup

It can be used anywhere in factories, workshops and laboratories to quickly check the viscosity of fluids.

Each cup has a 30 cm long ring handle that can be held by hand to submerge the cup in the liquid.

There is a ring in the center of the handle to keep the cup vertical during the test.

Pushen Zahn-5# Zahn Cup Details Figure 1

Pushen Zahn-5# Zahn Cup Details Picture 2

Pushhen Zahn-5# Zahn Cup Details Picture 3

Standards

ASTM D 4212

Comparison of parameters of PS ZAHN Cup series

modelcup numberoutflow apertureMeasuring rangeoutflow time
PS 1024/1number 125-6035-80
PS 1024/2number 22.720-25020-80
PS 1024/3number 33.8100-80020-80
PS 1024/4No 44.3200-120020-80
PS 1024/5Number 55.3400-180020-80
Unit: mm, cSt, s
Other parameters
StandardsASTM D 4212
materialStainless steel
FAQ
QWhat is the capacity of this viscosity cup?
A 44ml
QDo you have the Zahn Cup required by the ASTMD1084 standard?
A This Zahn-5 #Zahn Cup will do.
QCoating viscosity measured by flow cup method, must be at the specified temperature? If not according to the specified viscosity will have any impact?
A Viscosity cup measurement generally has 3 variables, viscosity, outflow time and temperature. Temperature is specified in many viscosity measurement standards because temperature has a large impact on viscosity, and the change of viscosity with temperature may not be dominant, and any diluted material used to adjust viscosity may also change the rate of this change.
Knowledge
Standard