PUSHEN GKL-II initial drying anti-crack Tester

GKL-II

Initial drying crack Tester

Used for the determination of cracking resistance performance of laminated architectural coatings, equipped with handheld Anemometer measurement of wind speed, Fan Power 100W, wind speed in wind tunnel 3 + 0.3m/s, anemometer range 0~10m/s.

Introduction

GKL-II dry anti-crack Tester is a special instrument designed and manufactured according to the provisions of GB9779-88 "Multilayer Architectural Coatings" on the initial dry anti-crack test. It is mainly used for the determination of the initial drying crack resistance of multi-layer architectural coatings. The instrument uses an axial flow fan to supply air, and the wind speed can be adjusted steplessly.

GKL-II initial drying anti-crack Tester is mainly used for the determination of the initial drying anti-cracking performance of multi-layer architectural coatings. The instrument consists of a fan, a wind tunnel and a bracket. The cross section of the wind tunnel is square. Configure a handheld anemometer to measure wind speed.

Standards

GB/T9779

Shipping List

Crack Tester

wind speed controller

Anemometer

Packing list：Anti-crack tester X1, wind speed controller X1, Anemometer X1, instruction manual X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.