YONGLIDA QFR Solvent Rub Resistance Tester coating solvent resistance Tester
SEUsed to test the solvent resistance of aluminum-plastic composite panels and similar substrate coatings. Visually detect whether the substrate is exposed at the scrubbing place by scrubbing the coating under specified solvents and conditions. The instrument has a wipe test stroke of 100mm and a wipe test frequency of 100cpm
$553.00/set
PromotionLoading...
Coupon
Model：
QFR
Similar products
YongLiDa QFR Solvent Rub Resistance TesterSPEC
YongLiDa QFR Solvent Rub Resistance TesterDetails
YongLiDa QFR Solvent Rub Resistance TesterPacking list
- SKU
- NB018170
- Scrub stroke
- 100mm
- Scrub frequency
- 100cpm
- friction load
- 1000±100g
- Grinding head area
- 2cm²
QFR
Solvent Rub Resistance Tester
Used to test the solvent resistance of aluminum-plastic composite panels and similar substrate coatings. Visually detect whether the substrate is exposed at the scrubbing place by scrubbing the coating under specified solvents and conditions. The instrument has a wipe test stroke of 100mm and a wipe test frequency of 100cpm
Introduction
Yonglida QFR solvent-resistant scrubbing instrument is suitable for measuring the solvent resistance of the coating on aluminum-plastic composite boards and similar substrates. After scrubbing the coating under specified solvents and conditions, visually check whether the substrate is exposed at the scrubbing place.
FAQ
QI want to test the solvent resistance of aluminum-plastic sheet coatings, what instrument should I use?
A
The QFR solvent rub tester is specially designed for the solvent resistance test of coatings on substrates such as aluminum-plastic composite plates. It can simulate the erosion of solvents to coatings in actual use and accurately evaluate the coating mass through standardized scruf experiments.
QCan this QFR meet this GB/T23989 standard?
A
No, the machine conforms to GB/T17748-1999.
QWhat is the size of this QFR Solvent resistant wiper?
A
Hello, it's 2cm2.
QDoes the solvent rub tester meet ASTMD 5402 specifications?
A
Model QFR solvent rub tester
Knowledge
Standard
- 1ASTM D7835/D7835M-23《Standard Test Method for Determining the Solvent Resistance of an Organic Coating Using a Mechanical Rubbing Machine》
- 2SJ 20910A-2018《General specification for powder spraying coating》
- 3JB/T 4279.10-2008《Verification procedure for test equipment of enamelled winding wire.Part 10:Tester for resistance to solvents》
- 4GB/T 13448-2019《Test methods for prepainted steel sheet and strip》
- 5HG/T 5776-2020《Water-based coatings for surface of rubber sealing products》
- 6HG/T 5367.1-2018《Coatings for rail transit vehicles - Part 1: Waterborne coatings》
- 7GB/T 22412-2016《Aluminium-plastic composite panel for ordinary decoration》
- 8ASTM D5402-2019《Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs》
- 9ASTM D4213-2024《Standard Test Method For Scrub Resistance Of Paints By Abrasion Weight Loss》
- 10GB/T 5211.9-1985《Method for the determination of resistance to solvent of pigments》