Germany EPK MiniTest 70FN Pocket Coating Thickness Gauge magnetic eddy current dual-use

MiniTest 70FN

Coating Thickness Gauge

Magnetic and eddy current dual-use, built-in probe, automatic identification of substrate, thickness measurement range F: 0~3000μm; N: 0~2500μm, error range +/- 2%, with statistical function, support 1 or 2 point calibrate.

Introduction

• The MiniTest 70 Series Pocket Coating Thickness Gauge provides fast and accurate measurement of non-magnetic coatings on steel0 ~ 3000 μm

• Insulating coating on non-ferrous metal substrates0 ~ 2500  μm

• Automatically recognizes the substrate material

• Built-in probes

• Universal measurement methods

• It has a statistical function

apply

Quick and easy non-destructive measurement of coating thickness, available in two models

MiniTest 70 F: Built-in probe for measuring non-magnetic coatings on iron substrates

MiniTest 70 FN : Built-in probe, dual-purpose version, measuring non-magnetic coatings on ferrous substrates, non-conductive coatings on non-ferrous substrates

Features

The four buttons are clear at a glance;

Built-in statistical functions: number of readings, maximum value, minimum value, average value, standard deviation;

No training is required to use.;

There is a sound prompt for each reading;

A standard AA battery, when the power is too low, the BAT will be displayed, and the reading error will not be caused by insufficient power

The dual-purpose built-in probe does not need to select the measurement mode, and the instrument will automatically select the measurement mode according to the substrate material: magnetic or eddy current principle

 Display diagram

Packing list：MiniTest 70FN host × 1, iron and aluminum plates, calibrated foil, operating instructions, tether, Encasement box

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.