HUITAI LRH-250CB cryogenic incubator -40~ 65 ℃/250L

LRH-250CB

Cryogenic incubator (cryopreservation box)

Temperature range -40~ 65 ℃ and temperature fluctuation +/- 0.5 ℃, equipped with 99 cycle program and air duct circulation system to ensure Temperature uniformity. Mirror stainless steel liner is easy to clean, supports shelf adjustment and test hole selection.

Use overview

Widely used in storage medium, serum, medicine, microbial culture, environmental test, etc.

Features

1) Humanized design

⊕Large-screen LCD display, multi-group data display on one screen, menu-style operation interface, easy to understand and easy to operate. (standard configuration)

⊕ Use 134 a fluorine-free refrigerant, effective, energy-saving, and make the environment healthier!

⊕Mirror stainless steel liner is adopted, the semi-circular arc design of the four corners is easy to clean, and the distance between the shelves in the box is adjustable.

⊕Double-layer door structure is adopted, which has good heat insulation performance, and the temperature inside the box will not be affected when observing the situation inside the box.

⊕ There is a test hole with a diameter of 25mm/50mm on the left side of the box, which is convenient for experimental operation and temperature measurement. (optional)

2) Quality Assurance

⊕Adopt international brand compressors, self-developed compressor cooling system, which can effectively prolong the service life of the compressor.

⊕Using JAKEL pipe flow circulation fan, coupled with a uniquely designed air duct structure, creates a good air circulation system and effectively ensures the temperature uniformity in the box.

⊕Adopt the international good brand humidity sensor, self-designed built-in Water Tank electric heating tube humidification system, effectively guarantee the humidity deviation.

⊕PID control mode, accurate temperature control and humidity control with little fluctuation, menu-style operation page, easy to understand and easy to operate.

⊕The program has 99 cycles, each cycle is divided into 30 sections, and each section has 99 hours and 99 minutes of cycle steps, which can meet almost all complicated experimental processes.

◆Independent temperature limit alarm system (optional)

⊕If the temperature exceeds the limit, the operation will be automatically interrupted, and the operator will be prompted by an audible and visual alarm. Ensure the safe operation of the experiment without accidents.

◆Convenient data processing (optional)

⊕Has a USB or RS485 interface, can be connected to a printer or a computer, and can record changes in temperature parameters. (optional)

Optional

Intelligent program controller

Independent temperature limit controller

Embedded printer

RS485 interface and special software

Test hole 25mm/50mm

Packing list：Host X1, shelf X3, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.