MODERNER XD-1VOC-A1 VOC release chamber, compartment volume 1000L

XD-1VOC-A1

VOC release chamber

product description

The environmental chamber can realistically simulate environmental parameters such as temperature, humidity, ventilation frequency, and air flow rate on the surface of the pattern. Through the analysis and verification of the test data results, the amount of volatile toxic and harmful (VOC) substances contained in the pattern material can be measured and calculated. The impact of its release characteristics on the environment can in turn:

• Determine the impact of environmental variables on the VOC release amount and release characteristics of test materials

• Classify materials based on their VOC release characteristics

• Development of pattern materials and verification of indoor air VOC release pollution characteristics

• The time duration attenuation of VOC emissions from model materials in the natural environment

• The assessment of indoor air quality will be predicted based on the detection data analysis.

fulfill the standard

GB18580-2001 "Limits of Formaldehyde Release in Interior Decoration Materials - Artificial Panels and Their Products"

GB18584-2001 "Limits of Hazardous Substances in Wood Furniture, Interior Decoration Materials" (Draft for Approval)

Appendix A (Normative Appendix) in GB18587-2001 "Indoor Decoration and Renovation Materials - Carpets, Carpet Pads and Carpet Adhesives Release Limits of Hazardous Substances": Small Environmental Test Chamber Method.

GB50325-2010 "Code for Indoor Environmental Pollution Control of Civil Construction Projects"

GB36246-2018 Synthetic material surface sports venues for primary and secondary schools

GB/T 28489-2012 "Limits of Hazardous Substances in Musical Instruments"

GB/T 29899-2013 "Test Method for Release of Volatile Organic Compounds in Artificial Panels and Their Products - Small Release Chamber Method"

GB/T 31107-2014 "General Technical Conditions for Climate Chambers for Detection of Volatile Organic Compounds in Furniture"

LY/T1980-2011 "Volatile organic compounds and formaldehyde release detection box"

LY/T1981-2011 "Formaldehyde Release Gas Analysis Detection Box"

JG/T344-2011 "Indoor Environmental Test Chamber for Construction Engineering"

JG/T 528-2017 "Test Method for Volatile Organic Compound Release from Building Decoration Materials—Test Chamber Method"

HJ 571-2010 "Technical Requirements for Environmental Labeling Products Artificial Panels and Their Products"

HJ/T 201-2005 "Technical Requirements for Environmental Labeling Products Water-based Coatings"

HJ/T 220-2005 "Technical Requirements for Environmental Labeling Products Adhesives"

HJ/T 414-2007 "Technical Requirements for Environmental Labeling Products Solvent-based Wood Coatings for Interior Decoration" International Standard

ASTM D 5116-97 "Standard Guide for Determination of Organic Releases from Indoor Materials and Products in Small-Scale Environmental Chambers"

ASTM D 6007-02 "Standard Test Method for Determination of Formaldehyde Concentration in Gas Released from Wood Products in a Small Environmental Chamber"

ASTM D 6330-98 "Standard Practice for Determination of VOCs (Formaldehyde Removal) Emissions from Wooden Panels in Small Environmental Chambers under Specified Test Conditions"

ASTM D 6670-01 "Standard Practice for Determination of VOCs Emissions from Indoor Materials and Products in Full-scale Environmental Chambers"

ASTM D 6803-02 "Standard Practice for Testing Volatile Organic Compounds (Including Carbonyl Compounds) in Paints Using Small Environmental Test Chambers"

EN 717-1 2004 "Wooden-based panels - Test determination of formaldehyde release - Part 1: Determination of formaldehyde release using a Test Chamber"

ENV 13419-1 "Construction Products - Determination of VOCs Release Part 1: Release Test Environmental Chamber Method"

ISO 12460-1.2007 "Determination of Formaldehyde Emission from Boards by 1m3 Climate Chamber Method" American Standard

ISO 16000-9-2006 "Determination of volatile organic compounds released from building products and furniture - Laboratory release method"

ISO FDIS 12219-4-2012 "Method for determination of volatile organic compounds in vehicle interior parts and materials - Small climate chamber method"

ANSI/BIFMAX7.1-2007 "Standard Test Method for Determination of Volatile Compounds (VOCs) Emitted from Office Furniture, Components and Seats" European Standard

Packing list：machine X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.