United States

RDS 22 #3/8 "Applicator rod WFT 50μm Length 400mm

SE
Wire-wound, wet film thickness 50.3μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, hand width 50 + 50mm, material stainless steel, Wire diameter 0.56mm.
$161.00/piece
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO CAT OI
Similar products

RDS 22# 3/8" Applicator rod 3/8 "SPEC

RDS 22# 3/8" Applicator rod 3/8 "Details

RDS 22# 3/8" Applicator rod 3/8 "Packing list

SKU
NB000019
Production process
wire-wound
WFT
50.3μm
diameter
9.52mm
Total length
400mm
application width
300mm
Grip Width
50+50mm
material
stainless steel
Wire diameter
0.56mm
22# 3/8"
Applicator rod 3/8 "
Wire-wound, wet film thickness 50.3μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, hand width 50 + 50mm, material stainless steel, Wire diameter 0.56mm.
RDS 22 #3/8 "Applicator rod WFT 50μm Length 400mm Picture

RDS coating Rods Figure 1

RDS coating Rods Figure 2

RDS coating Rods Figure 3

RDS coating Rods Figure 4

RDS coating Rods Figure 5

RDS coating Rods Figure 6

RDS coating Rods Figure 7

RDS coating Rods Figure 8

RDS coating Rods Figure 9

RDS coating Rods Figure 10



FAQ
QWhat is the wet film thickness of bar 22 and bar 26?
A 22 bar wet film thickness of 50.3 μ m, 26 bar wet film thickness of 59.4 μ m.
QMay I ask what is the coil spacing on that RDS Wire-wound drawdown bar?
A You can refer to the following. https://www.nbchao.com/k/198/
QThe water glue scraping is 25 thick, containing 53 and 25g. After the glue dries, 25um, which wire rod to buy?
A Wet film thickness conversion about 47um, you can consider RDS 20 #or 22 #stick.
QApplicator rod scraping when the rod is to roll?
A Hello, no, Applicator rod can't roll when scraping, just scrape it off vertically.
QWhat is the wire diameter of RDS No. 22 Proofing rod in mm?
A Hello, the wire diameter of No. 22 rod is 0.56mm.
QIs this kind of wire rod used for the preparation of hot melt adhesive backing layer?
A Yes, this model can prepare wet film 50um, which can be scraped by hand or matched with motorized film on the film machine.
QDo you support customization? Such as wet film thickness and length?
A Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.
QIs this the Applicator rod mentioned in GB/T13217.1?
A OK
QIs the number after the model RDS of the Mailer stick universal?
A Hello, the engraved numbers on the RDS Mailer stick represent its model. Different models represent different wet film thicknesses. They are only used for the brand of RDS, not universal. Thank you for your consultation!
Knowledge
Standard
Filter Brand Store Contact