JFL QFR Solvent Rub Resistance Tester

JFL QFR Solvent Rub Resistance Tester is suitable for measuring the solvent resistance of coatings on aluminum-plastic composite plates and similar substrates. After scruf coating under specified solvents and conditions, visually detect whether there is a substrate phenomenon at the scruf.

$720.00/set

PromotionLoading...

Coupon

Model：

Certificate

JFL

Manufacturer authorization

Contact

Details SPEC Con

JFL QFR Solvent Rub Resistance TesterSPEC

JFL QFR Solvent Rub Resistance TesterDetails

JFL QFR Solvent Rub Resistance TesterPacking list

SKU: NB019009

Scrub stroke: 100mm

Scrub frequency: 100cpm

friction load: 1000±100g

Grinding head area: 2cm²

QFR

Solvent Rub Resistance Tester

Introduction

It is suitable for measuring the solvent resistance of coatings on aluminum-plastic composite boards and similar substrates. After scrubbing the coating under specified solvents and conditions, visually check whether the substrate is exposed at the scrubbing place.

FAQ

QI want to test the solvent resistance of aluminum-plastic sheet coatings, what instrument should I use?

A The QFR solvent rub tester can be used for coating solvent resistance testing of substrates such as aluminum-plastic panels. After passing the standard solvent scruf, observe whether the bottom is exposed, which fully meets your testing needs.

QCan the scruf parameters of the instrument meet the standard test requirements?

A Yes, the 100mm Travel, 100cpm Frequency and 1000g load of the QFR are all designed according to the standard, and the 2cm ² grinding head can accurately simulate the actual scruf conditions to ensure the Reliability of the test results.

QCan this QFR meet this GB/T23989 standard?

A Yes!

QI used Yaxing's QFR before, can I replace it with this one now?

A Hello, it's okay.

QDo you have the solvent rub tester required by ASTMD5402?

A This QFR solvent rub tester will do.

Standard

Filter Brand Store Contact