JFL QTZ paint film cone bending test

JFL QTZ conical film bending test according to GB/T11185-89, ISO6860-1984 design and manufacture. Metal sheet film, under standard conditions around the conical mandrel after bending cracking, disbonding performance and coating elongation. Expressed in cm.

$216.32/set

PromotionLoading...

Coupon

Model：

Certificate

JFL

Manufacturer authorization

Contact

Details SPEC Con

JFL QTZ Paint film cone bend testSPEC

JFL QTZ Paint film cone bend testDetails

JFL QTZ Paint film cone bend testPacking list

SKU: NB019012

Cone shaft length: 203mm

Big end diameter: 38mm

Small end diameter: 3.2mm

Operating Temperature: 23 +/-2 degrees Celsius

Relative humidity: 50+/-5％

QTZ

Paint film cone bend test

JFL QTZ paint film cone bending test Picture

Introduction

Designed and manufactured according to GB/T11185-89, ISO6860-1984. Cracking resistance, peeling performance and elongation of the coating film on the metal plate after being bent around a tapered axis under standard conditions. expressed in cm.

It is suitable for coating multi-layer systems, which can be used to test a single layer or determine the cone bending resistance of the entire coating system.

JFL QTZ Conical Bending Tester for Paint Film

FAQ

QDoes the film cone bending test fully meet the ISO6860 standard?

A Hello, it matches.

QI want to do about SY/T0315 standard test, this film cone bending test is ok?

A Sure

Standard

Filter Brand Store Contact