United States

RDS #0 Spreader Smooth Rods Diameter 1/2 "

SE
RDS #0 Spreader Smoothing Rods are smooth and free wire-wound Spreader rods with a Total length of 400mm and an effective Spreader width of 30cm. They are imported Spreader rods made of stainless steel.
$161.00/piece
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO
Similar products

RDS 0# 1/2" Applicator rod 1/2 "SPEC

RDS 0# 1/2" Applicator rod 1/2 "Details

RDS 0# 1/2" Applicator rod 1/2 "Packing list

SKU
NB001902
WFT
0μm
diameter
12.7mm
Total length
400mm
Application width
300mm
Grip width
50+50mm
material
stainless steel
Wire diameter
0mm
0# 1/2"
Applicator rod 1/2 "
RDS #0 Spreader Smoothing Rods are smooth and free wire-wound Spreader rods with a Total length of 400mm and an effective Spreader width of 30cm. They are imported Spreader rods made of stainless steel.
RDS #0 Spreader Smooth Rods Diameter 1/2 " Picture
RDS model tableRDS wire rod experiment reportCoating Knowledge Collection


RDS0# 1/2" coating rod is a smooth steel rod with 0μm coating thickness, without any steel wire or pressure groove wrapped around the surface. It is often used in the paper industry. Because of the RDS 0# 1/4" coating rod The thickness of the manual coating film is 0 μm, so it is often used to control the thickness of the coating film on the machine and let the machine do the coating.

plan

RDS 0# 1/2"coating stick display


RDS 0# 1/2"coating rod details

Optional

Wire Rod Cleaning Machine

LABOratory automatic coating machine

Coating film test jamRK imprint bed

Note: Click on the accessory picture to view Details.

FAQ
QDo you have a smooth coating bar?
A This one is it.
QDo you support customization? Such as wet film thickness and length?
A Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.
QCan this coating rod be prepative of multi-layer ultra-thin film?
A The wire rod can be prepared for 1.5 micron ultra-thin film. Everyone must know it, but another advantage of it is multi-layer film, which is much better than I-shaped film applicator. But multi-layer film tests the flatness of the previous layers of film drying. Generally, the film thickness (such as less than 10 microns/layer) is too thin to control. The wire rod with Film Applicator is a very good solution, eliminating the problem of uneven pressure and speed of hand scraping.
QMeet GB/T26461 Applicator rod
A 0 #1/2 "Applicator rod, please refer to it.
Knowledge
Standard
Filter Brand Store Contact