PERFECT PT-6030 Tape initial tack testing machine (rolling ball method)
Model：
PT-6030
Similar products
Perfect PT-6030 Tape initial tack testing machine (rolling ball method)SPEC
Perfect PT-6030 Tape initial tack testing machine (rolling ball method)Details
Perfect PT-6030 Tape initial tack testing machine (rolling ball method)Packing list
- SKU
- NB019127
- Tilt angle
- 20°~40°(Normal：30°)
- bocce
- 1/32"~1"
- Weight
- 500g
- Assist runway length
- 100mm
PT-6030
Tape initial tack testing machine (rolling ball method)
Introduction
The purpose of the tape initial adhesion testing machine: the adhesive side of the tape sample is glued upwards to the test board with an inclination angle of 30 °, the steel ball is taken from the largest size, and the ball number is recorded on the sample for more than 5 seconds, which is used as the initial tack value of the tape.
FAQ
QCan all tape initial tacking machines (rolling ball method) be used for inspection in GB/T 4852 standard?
A
Not necessarily, but this PT-6030 tape initial tack testing machine (rolling ball method) can be considered.
Knowledge
Standard
- 1HG/T 5751-2020《Flame retardant insulation tape for EV battery》
- 2GB/T 31125-2014《Test method of adhesive tapes—Loop tack》
- 3GB/T 4852-2002《Test method for tack of pressure sensitive adhesive tapes by rolling ball》
- 4HG/T 2406-2002《Pressure sensitive adhesives label for general purpose》
- 5QB/T 2422-1998《BOPP Pressure sensitive adhesive for sealing》