China

CQX CQ-J12 gel time meter temperature control: room temperature -350 ℃

SE
Temperature range of -350 ℃, CQX CQ-J12 gel time meter is a gel time meter for powder coatings and raw material gel time determination, with 200x200x200mm heating platform.
$490.00/set
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO OI

CQX CQ-J12 Gel time meterSPEC

CQX CQ-J12 Gel time meterDetails

CQX CQ-J12 Gel time meterPacking list

SKU
NB019805
Heating panel size
200*200*20mm
platform material
Good copper plate
Hole size
16±0.1mm
Temperature range
RT+~350℃
Temperature control Accuracy
±1℃
Heating time to 200 ℃
≤ 10 minutes
Maximum heating power
800W
Voltage
220V
CQ-J12
Gel time meter
CQX CQ-J12 gel time meter temperature control: room temperature -350 ℃ Picture

Introduction

CQ-J11 gelling time meter is suitable for measuring the gelling time of powder coatings and raw materials. Epoxy resin and its products, polyester resin and other products that need to detect their gelling time are used. The working platform of this product uses high-quality copper plates, long-life heating tubes, PID intelligent temperature controller, automatic constant temperature, easy to use, and accurate temperature.

Product Structure

Structure diagram of Chengqixin CQ-J12 gelling time meter


FAQ
QWhich instrument is suitable for measuring the gel time of powder coatings?
A Recommended CQ-J12 gel time meter, it is designed for powder coatings, using copper plate heating platform and PID intelligent temperature control, can accurately keep the test temperature within +/- 1 ℃, to ensure accurate and reliable gel time measurement.
QWhat equipment is needed for epoxy resin gel timing testing?
A CQ-J12 gel time meter is suitable, its Temperature range from room temperature to 350 ℃, can stabilize heating to the temperature required for epoxy resin testing, round hole size standard 16mm, convenient sample testing, simple operation.
QDimensions
A The outer size is about 40 * 40 * 40cm.
QUsed to detect the time of polyester resin livering, is this the right one?
A Yes.
QIs the gel time determined by stirring with a toothpick?
A There are bamboo sticks inside.
QAre the samples placed on the entire platform?
A The sample is placed in a round hole in the middle, with a diameter of 15mm.
QIs there a gel time tester? 0-200 ° C, accuracy 0.1 ° C, time should be accurate
A China's accuracy is around +/- 1, not 0.1
QWhat is the difference between the two gel time meters? CQ-J12 and CQ-J20
A Hello, Chengqixin's two livering instruments J12 only test the livering time, and J20 can measure the livering time and melt flow.
QCan the CQX CQ-J12 gel time meter meet the ASTMD 4217 standard?
A Applicable, please consult the customer service of the mall for details about the ASTMD 4217 standard.
Knowledge
Standard
Filter Brand Store Contact