China

LIULING CH-1-B Latex Thickness Gauge 0~ 1mm

SE
The LIULING CH-1-B latex thickness gauge is a handheld thickness gauge with a thickness measurement range of 0 to 1mm. The CH-1-B latex thickness gauge can be used for sample measurement in physical laboratories, and the diameter of the probe is Ø 5mm.
$243.00/set
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con CAT OI
Similar products

LiuLing CH-1-B Thousand part latex thickness gaugeSPEC

LiuLing CH-1-B Thousand part latex thickness gaugeDetails

LiuLing CH-1-B Thousand part latex thickness gaugePacking list

SKU
NB019843
Measurement range
0~1mm
reading display
Pointer
Graduation
0.001mm
Pressure and mass required
22kPa±5kPa（44g±4g）
Probe diameter
φ 5mm (flat surface)
Meet the standard
HG/T 2041-2009
CH-1-B
Thousand part latex thickness gauge
LIULING CH-1-B Latex Thickness Gauge 0~ 1mm Picture

Introduction

This Thickness Gauge is an instrument for measuring the thickness of latex, rubber, paper, etc. It refers to the implementation of HG/T 2041-2009 "Technical Conditions for Rubber Thickness Gauge", HG/T 2198-2011 "General Requirements for Physical Test Methods of Vulcanized Rubber" and HG/T 2382-1992 "General Technical Conditions for Rubber Testing Instruments and Equipment" and other chemical Ministry of Industry Standards.

This instrument has the characteristics of simple structure, convenient use and reliable quality. There are two types of Thickness Gauges: hand type and table type: the hand type can be carried around, hand-held measurement, suitable for on-site measurement in the workshop; the table type can be used for sample measurement in the physical laboratory.


FAQ
QCan this Thickness Gauge be used as a horizontal measurement?
A No.
QI want to do a test on the QB/T1055 standard. Is this hand-held latex thickness gauge okay?
A Sure
Standard
Filter Brand Store Contact