RDS 23 #3/8 "Mayer Rods WFT 52.6μm Length 400mm
SEWire-wound, wet film thickness 52.6 μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel, Wire diameter 0.58mm.
$161.00/piece
PromotionLoading...
Coupon
Model：
23# 3/8"
Similar products
RDS 23# 3/8" Applicator rod 3/8 "SPEC
RDS 23# 3/8" Applicator rod 3/8 "Details
RDS 23# 3/8" Applicator rod 3/8 "Packing list
- SKU
- NB000020
- Production process
- wire-wound
- WFT
- 52.6μm
- diameter
- 9.52mm
- Total length
- 400mm
- application width
- 300mm
- Grip Width
- 50+50mm
- material
- stainless steel
- Wire diameter
- 0.58mm
23# 3/8"
Applicator rod 3/8 "
Wire-wound, wet film thickness 52.6 μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel, Wire diameter 0.58mm.
FAQ
QCan a casting solution of about 50 microns be scraped on a non-woven fabric?
A
OK
QDo you support customization? Such as wet film thickness and length?
A
Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.
QCan this RDS Applicator rod correspond to GB/T13217.7?
A
Yes, please refer to the NBchao standards page for specific standards.
QCan silicone coatings be applied to quartz Glass substrates?
A
Yes, choose quartz Glass as the substrate, with Mayer Rods Coating prepared above coated on the surface of the treated quartz Glass substrate, at room temperature to evaporate the solvent into the oven, at a certain temperature curing film formation.
QIs RDS 23 #10mm * 40.5CM size?
A
Hello, close to 9.4mm * 40cm.
Knowledge
- 1Bar Spreader Technology: Principles, Applications and Advantages over Miscellaneous coating methods
- 2Application of Mayer Rods in protective coating prepative
- 3Technical method and application of preparing nanometer silver wire thin films with Mayer Rods
- 4Application of Mayer Rods in Water-based ink Moulding
Standard
- 1YS/T 680-2016《Powder for coating aluminium alloy extruded profiles for architecture》
- 2HG/T 2006-2006《Thermosetting powder coatings》
- 3GB/T 1727-2021《General methods for preparation of coating films》
- 4GB/T 7044-2022《Colour carbon black》
- 5HG/T 20720-2020《Construction and acceptance specification of waterborne anti-corrosion coatings for steel structures in industrial buildings》
- 6HG/T 5370-2018《Waterborne coatings for bicycles》
- 7HG/T 3355-2003《Various colour nitrocellulose primer》
- 8HG/T 3951-2007《Water based colorants for architectural coatings》
- 9HG/T 3948-2007《Hot Melt Adhesives for Sanitary napkin & Panty liner》
- 10ASTM D4147-2023《Standard Practice for Applying Coil Coatings Using Wire-Wound Drawdown Bars》