China

ZHANYI No. 70, coating bar film thickness 70μm rod length 240mm

SE
Formed, wet film thickness 70μm, diameter 10mm, Total length 400mm, application width 205mm, hand width 17.5 + 17.5mm, material stainless steel.
Model:
Certificate

ZhanYi ZY-70/240 Mayer RodsSPEC

ZhanYi ZY-70/240 Mayer RodsDetails

ZhanYi ZY-70/240 Mayer RodsPacking list

SKU
NB000200
Production process
Formed
WFT
70μm
diameter
10mm
Total length
400mm
Application width
205mm
grip width
17.5+17.5mm
material
stainless steel
ZY-70/240
Mayer Rods
Formed, wet film thickness 70μm, diameter 10mm, Total length 400mm, application width 205mm, hand width 17.5 + 17.5mm, material stainless steel.
ZHANYI No. 70, coating bar film thickness 70μm rod length 240mm Picture

The coating bar used by domestic (CN) industry users is generally a model with a small micron film thickness. Zhanyi No. 70 coating bar is used to prepare a wet film thickness of 70 microns. The non-hot model of the coating bar is mainly used for some users . The equipment is used as standard, or special materials need to be used to prepare thicker wet films. According to the purchase record, Zhanyi No. 70 paint scraper is used in adhesives or a small number of other industries. The coating film accuracy of Zhanyi paint scraper is 1 micron, same as OSP, and the surface is chrome-plated with good finish.

Zhanyi No. 70 coating scraper operation video

Zhanyi No. 70 Paint Squeegee Specifications

Features and advantages of Zhanyi No. 70 paint scraper

Zhanyi No. 70 Paint Squeegee Applications

Zhanyi No. 70 paint scraper real shot picture 1

Zhanyi No. 70 paint scraper real shot picture 2

Optional

Wire Rod Cleaning Machine

LABOratory automatic coating machine

Coating film test jamRK imprint bed

Note: Click on the accessory picture to view Details.

FAQ
QIs there Mayer Rods with GB/T13452.3 standard?
A This ZHANYI Mayer Rods is fine!
QApplicator rod can be used to make nano ATO transparent insulating coatings?
A OK
QHow can I make the Spreader uniform Film thickness suitable?
A When you apply glue, you need to know your Spreader amount per square meter, Solid content and Sample Density, so that you can calculate the wet film thickness you want. Then select the corresponding model Applicator rod according to the wet film thickness.
QWhy does it feel rusty on the wire rod??
A Hello, this is normal for the wire rod. Because there is a layer of oil attached to the surface of industrial products, sometimes it will not be cleaned properly when it leaves the factory, so just wipe it off with Tianna water. Thank you for your consultation!
Standard