HANNA HI98130 High Range pH-EC-TDS- ℃, Water Quality Analyzer
SE
HI98130
HANNA HI98130 Water quality analysis instrumentSPEC
HANNA HI98130 Water quality analysis instrumentDetails
HANNA HI98130 Water quality analysis instrumentPacking list
- SKU
- NB020338
- Measurement range -PH
- 0.00 to 14.00 pH
- Resolution-PH
- 0.01 pH
- Measurement Accuracy -PH
- ±0.05 pH
- EC range
- 0.00 to 20.00 mS/cm
- Resolution-EC
- 0.01 mS/cm
- Measurement Accuracy -EC
- ±2% F.S.
- TDS range
- 0.00 to 10.00 ppt (g/L)
- Measurement Accuracy TDS
- ±2% F.S.
- Temperature Measurement Range
- 0.0 to 60.0℃ /32.0 to 140.0 ℉
- temperature resolution
- 0.1℃ /0.1 ℉
- Temperature measurement Accuracy
- ±0.5℃ /±1 ℉
- pH calibrated
- 1-2 points automatically identify calibrate, built-in 2 sets of standard calibrate points pH4.01, 7.01, 10.01 and pH4.01, 6.86, 9.18
- EC calibrated
- Single point: 1413μS/cm
- TDS calibrated
- Single point: 1382ppm (mg/L)
- EC-TDS temperature compensation
- Compensation coefficient β = 0.0 to 2.4%/℃ adjustable, increment 0.1
- TDS factor
- Alignment range: 0.45 to 1.00
- Electrode type
- Direct pH electrode
- Power supply type
- 4x1.5V button battery, automatic shutdown after 8 minutes without any operation
- Adapt to the environment
- 0℃ to 50℃（32 ℉ to 122 ℉），max 100% RH
- Size Weight
- Size: 163x40x26 mm, Weight: 100g
Introduction
HI98130 high-range pH-EC-TDS- ℃ water quality analysis and Measurement Instrument adopts the new Appearance design, double-line screen display, with the screen calibrating operation steps prompt, humanized Operating interface, stable indication logo, two-button simple operation, convenient operation, while the measurement display pH (EC/TDS) and ℃ measurement, pH, EC, TDS fast switching, automatic identification calibrated, automatic temperature compensation, to ensure that in different environments, measurement can not afford and accurate, battery replacement is simple and fast, BEPS low power error prevention system, to avoid erroneous measurement, suitable for on-site environment can also provide laboratory-level measurement results.
Features
One Instrument, Three Sensors.
Waterproof design, as intended, into the sample, floating on the surface.
Automatic temperature compensation.
Stabilize the reading, locking the reading on the display so that the Measured value is recorded.
Low battery reminder, if there is not enough battery, the instrument will automatically shut down.
Automatic shutdown function, which automatically shuts down after 8 minutes of non-use to extend battery life.